
Rubber & FoamSKU IP-EPDF-100X100-STD
Non-Marking EPDM D Fender – 100mm x 100mm – 3m Length
This non-marking D fender is 100mm wide and 100mm high with a 50mm x 50mm hollow bore, made from grey EPDM rubber and sold as one 3m length. The flat back fixes straight to a quay, hull or dock face, and the hollow D compresses on impact to absorb the load without leaving black marks on boats, vehicles or painted walls.
At a glance
- Non-marking D fender in grey EPDM, 72° Shore A
- 100mm x 100mm D profile with a flat fixing face
- 50mm x 50mm hollow bore for impact absorption
- Weighs about 9kg per metre, 27kg per 3m length
- Resists weathering, seawater and abrasion
- Sold as one continuous 3m length, cut to fit
Typical uses
- Rubbing strake and belting on tugs, workboats and dredgers where hull marking matters
- Impact protection along quays, pontoons and jetties
- Wall and dock-face protection in lorry loading bays and warehouses
- Bumper strips on commercial trailers and car park walls
Which one do I need?
| Fender | Size | Material | Best for |
|---|---|---|---|
| Non-marking D fender (this item) | 100 x 100mm, 3m | Grey non-marking EPDM | Boats and painted surfaces where black marks are not acceptable |
| Hollow rubber D fender | 150 x 150mm, 3m | Black NR/SBR | Heavier impacts at quays and loading bays |
| Hollow rubber D fender | 200 x 200mm, 2m | Black NR/SBR | Large vessels and heavy dock protection |
| Hollow PVC DD fender | 100 x 55mm, 3m or 5m | Black PVC | Lighter, lower-profile bump strips |
Technical drawing
Specification
| Profile | D shape with flat fixing face and hollow bore |
| Outer size | 100mm wide x 100mm high |
| Bore | 50mm x 50mm |
| Material | Non-marking EPDM rubber |
| Colour | Grey |
| Hardness | 72° Shore A |
| Weight | Approx. 9kg per metre (27kg per length) |
| Unit of sale | One 3m length |
How much do I need?
Measure the run you want to protect and divide by 3. Example: a 7.5m stretch of pontoon edge needs 7.5 ÷ 3 = 2.5, so order 3 lengths and trim the last one. Allow 27kg per length when planning handling and fixings.
Fitting tips
- Drill through the bore and flat back at regular centres, then counterbore so bolt heads sit inside the hollow, clear of the striking face.
- Use large washers or a backing strip so fixings do not pull through under impact.
- Choose stainless steel fixings for marine and outdoor use.
- Mount on a flat, sound surface; the 9kg/m weight needs secure anchors along the full run.
Complete your project
- Hollow Rubber D Fender – 150mm x 150mm – 3m Length
- Hollow PVC DD Fender – 100mm x 55mm – 3m or 5m Length
- Hollow Rubber D Fender – 200mm x 200mm – 2m Length
Questions
Will this D fender leave marks on boat hulls?
No. It is made from a grey non-marking EPDM compound, so it avoids the black scuffs that standard black rubber fenders leave on gelcoat, paint and vehicle bodywork.
Can it bend around corners?
Its 100mm x 100mm section at 72° Shore A suits straight runs and gentle curves. For corners, cut and mitre separate pieces.
How do I cut it?
Use a fine-tooth saw or a heavy-duty blade and keep the cut square so lengths butt neatly end to end.
Is it suitable for saltwater?
Yes. EPDM resists seawater, weathering and abrasion, which makes it a good choice for pontoons, jetties and workboats.
Need help choosing a fender size? Contact our team with the location and the type of impact and we will advise.
Product details
| SKU | IP-EPDF-100X100-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Non-Marking EPDM D Fender – 100mm x 100mm – 3m Length