Rubber & FoamSKU IP-PCSS-5X5
Platinum Cured Silicone Strip – Translucent Food Grade – 10m Roll
Price shown updates with the option you pick.
This platinum cured silicone strip is a translucent, food grade silicone rubber strip for hygienic seals, gaskets and protective edging, sold as one continuous 10m roll in 5mm x 5mm, 10mm x 10mm, 90mm x 3mm or 100mm x 3mm. Platinum curing leaves no peroxide by-products, so the strip stays clear, glossy and non-yellowing.
At a glance
- Platinum cured silicone with no peroxide by-products
- Translucent, glossy, non-yellowing and non-toxic
- Meets FDA 177.2600 and EC 1935/2004 for food and beverage contact
- 60 Shore A with higher tear strength than standard peroxide-cured silicone
- Works from -40°C to +200°C; resists UV, ozone and weathering
- Four sizes, each as one continuous 10m roll
Typical uses
- Seals and gaskets on food and beverage processing equipment
- Clean, clear sealing strip for medical device assembly
- Hygienic seals on pharmaceutical production lines
- Insulating and sealing strip in electronics assembly
Which one do I need?
| Strip size | Best for |
|---|---|
| 5mm x 5mm | Small square seal for compact enclosures, instruments and electronics |
| 10mm x 10mm | General square gasket for food machinery doors and lids |
| 90mm x 3mm | Wide, thin strip for flat flange gaskets and cut-to-shape washers |
| 100mm x 3mm | Widest strip for large flat seals, liners and wear pads |
Technical drawing
Specification
| Material | Platinum cured silicone rubber |
| Sizes | 5mm x 5mm, 10mm x 10mm, 90mm x 3mm, 100mm x 3mm |
| Colour | Translucent |
| Hardness | 60 Shore A |
| Tensile strength | 10.3 MPa |
| Elongation at break | 600% |
| Tear strength | 25 N/mm |
| Compression set (22h at 175°C) | 20% |
| Operating temperature | -40°C to +200°C |
| Approvals | FDA 177.2600, EC 1935/2004 |
| Unit of sale | One 10m roll |
How much do I need?
Measure the perimeter of each seal and add about 5% for joints and trimming. Example: a 600mm x 400mm hopper lid gasket is 2m around, plus 5% = 2.1m, so one 10m roll seals four lids with a little spare.
Fitting tips
- Clean and degrease the mating surface first; silicone bonds only with a silicone-compatible adhesive or primer.
- Cut with a sharp blade or rubber shears for a square, clean end that seals well at joints.
- Lay the strip in without stretching it, so it does not pull back and open the joint later.
- For a continuous gasket, butt the ends tightly or bond them with a silicone adhesive.
Complete your project
- Silicone P Extrusion – Food Contact Grade – 25mm x 12mm
- White Silicone Sponge Cord – Closed Cell – 10m Roll
- Silicone L Profile – 20mm x 15mm, 1.3mm Wall
Questions
Is the platinum cured silicone strip safe for direct food contact?
Yes. The material meets FDA 177.2600 and EC 1935/2004 for food and beverage contact.
What is the difference between platinum cured and standard silicone strip?
Platinum curing leaves no peroxide by-products, so the strip is clearer, glossier, non-yellowing and has higher tear strength than peroxide-cured silicone.
What temperatures can it take?
It works from -40°C to +200°C and stays flexible in the cold.
Which size should I choose for a door or lid gasket?
Use 5mm x 5mm or 10mm x 10mm for square-section door and lid seals, and 90mm or 100mm x 3mm for flat flange gaskets you cut to shape.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-PCSS-5X5 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Platinum Cured Silicone Strip – Translucent Food Grade – 10m Roll