
Rubber & FoamSKU IP-PUEP-70X70-STD
PU Foam Corner Protector – 70mm x 70mm L Profile – 1m Length
This PU foam corner protector 70mm x 70mm is a large self-adhesive L profile in yellow and black hazard stripes that cushions and highlights sharp 90° corners on columns, racking and machinery. It is sold as one 1m length.
At a glance
- Extra-large 70mm x 70mm L-shaped corner guard
- Flexible high-density polyurethane (PU) foam with a tough outer skin
- Yellow and black hazard stripes for high visibility
- Self-adhesive backing on both inside faces
- Resists moisture, oils and UV light
- Sold as one 1m length - order several for taller corners
Typical uses
- Structural columns, pillars and steel H-beams in warehouses
- Racking uprights and end frames in busy aisles
- Loading dock and roller door openings
- Brickwork corners in garages, workshops and transport depots
- Machinery enclosures and plant room corners
Which one do I need?
| Size | Best for |
|---|---|
| 47mm x 47mm corner guard | Cabinets, door frames and lighter-traffic corners |
| 70mm x 70mm (this protector) | Columns, racking and corners exposed to pallet trucks and trolleys |
| Flat chevron wall guard | Flat wall faces rather than corners |
Technical drawing
Specification
| Material | Polyurethane (PU) foam |
| Profile | L shape for 90° corners |
| Size | 70mm x 70mm |
| Unit of sale | One 1m length |
| Colour | Yellow and black stripes |
| Fixing | Self-adhesive backing |
| Hardness | 40° to 50° Shore C |
| Tensile strength | 8 to 20 MPa |
| Elongation at break | 150% to 350% |
| Tear strength | ≥22 kN/m |
| Operating temperature | -15°C to +75°C |
How much do I need?
Measure the height you want to protect on each corner and round up to whole metres. Guarding one column corner from the floor to 2m needs two lengths; all four corners of that column need eight. Most impacts happen below 1.2m, so many sites fit one length per corner at floor level.
Fitting tips
- Degrease and dry the corner thoroughly before peeling the liner.
- Peel the liner back a little at a time and align the guard flush with the corner.
- Press firmly along both 70mm legs to bed the adhesive.
- Do not stretch the foam while fitting.
- On rough brick or concrete, add a suitable construction adhesive.
Complete your project
- Right Angle Edge Protection Guard 5m – 47 x 47mm, Black and Yellow
- Chevron Wall Guard 500mm x 100mm x 15mm Polyurethane Black & Yellow
- Hazard Warning Cable Protector – 71mm x 13mm – 9m Roll
Questions
Can this corner protector be used outdoors?
Yes. The tough outer skin resists moisture, UV light and temperatures from -15°C to +75°C.
Can I cut it to length?
Yes. Cut the foam cleanly with a sharp trimming knife against a straight edge.
Will the adhesive hold on concrete?
It bonds well to clean, smooth, sealed surfaces. On textured brick or bare concrete, add a construction adhesive for a lasting fix.
What does 70mm x 70mm measure?
The width of each of the two legs that sit flat against the faces either side of the corner.
Need help choosing impact protection? Contact our team.
Product details
| SKU | IP-PUEP-70X70-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:PU Foam Corner Protector – 70mm x 70mm L Profile – 1m Length