
Rubber & FoamSKU IP-RNRT-3X4.5-RED
Red Natural Rubber Tubing – 45 Shore A Flexible Hose – 10m Roll
Price shown updates with the option you pick.
This red natural rubber tubing is a soft, flexible 45 Shore A hose for transferring liquids and gases in laboratories, schools and workshops. It is sold as one continuous 10m roll and comes in 15 metric sizes from 3mm ID x 4.5mm OD up to 25mm ID x 31.5mm OD.
At a glance
- Natural rubber flexible tubing, red, 45 Shore A
- 15 bore and wall combinations, thin wall to heavy wall
- Made to BS 2775:1987 for general laboratory rubber tubing
- Working temperature -65°C to +70°C
- Good electrical insulating properties
- Sold per 10m roll
Typical uses
- Bunsen burner and gas tap connections in school and college labs
- Condenser and cooling water lines on glassware
- Transfer of water and dilute acids
- General purpose flexible hose for indoor and outdoor use
- Heavy wall sizes for low vacuum lines where kinking must be avoided
Which one do I need?
Choose the bore (ID) to match the outside of your spigot or tap nozzle, so the tube stretches slightly over it. Thin wall stays most flexible; heavy wall resists kinking and suction.
| Size | Wall | Typical choice for |
|---|---|---|
| 3mm ID, 4.5mm OD | 0.75mm | Fine instrument and sample lines |
| 5mm ID, 8mm OD | 1.5mm | Small spigots, pipette and gas lines |
| 6.5mm ID, 9.5mm OD | 1.5mm | Lab gas taps and Bunsen burners |
| 8mm ID, 12mm OD | 2mm | Condenser and cooling water connections |
| 8mm ID, 20mm OD | 6mm | Heavy wall for vacuum and kink resistance |
| 12.5mm ID, 17mm OD | 2.25mm | General fluid transfer |
| 25mm ID, 31.5mm OD | 3.25mm | Larger bore drainage and transfer |
Technical drawing
Specification
| Material | Natural rubber |
| Colour | Red |
| Hardness | 45 Shore A |
| Sizes | 15, from 3mm ID x 4.5mm OD to 25mm ID x 31.5mm OD |
| Working temperature | -65°C to +70°C |
| Specific gravity | 1.22 g/cm³ |
| Standard | BS 2775:1987 |
| Unit of sale | One continuous 10m roll |
How much do I need?
Measure each run, add about 50mm per end for the push-on fit and a little slack. Example: twelve bench gas points each needing 600mm of tube plus 100mm for the ends use 12 x 0.7m = 8.4m, so one 10m roll covers the lab with spare.
Fitting tips
- Cut the end square so it seats evenly on the spigot.
- Wet the spigot with water to ease a tight push-on fit; never use oil, which attacks natural rubber.
- Use a hose clip on smooth spigots or where the line is under pressure.
- Keep the tube away from hot plates and flames; it is rated to +70°C.
Complete your project
- Red Natural Rubber Vacuum Tubing – 2mm to 30mm ID – 10m Roll
- Black Neoprene Rubber Tubing – 3mm to 25mm Bore – 10m Roll
- Platinum Cured Silicone Dairy Tubing – Translucent – 10m or 20m Roll
Questions
What size red rubber tubing fits a lab gas tap?
Measure the outside of the tap nozzle and pick the bore just under it, so the tube stretches on firmly; 6.5mm ID is a common choice for bench taps and Bunsen burners.
Is this rubber hose suitable for vacuum?
The heavy wall sizes, such as 8mm ID x 20mm OD or 10mm ID x 24mm OD, resist collapse far better than thin wall sizes. For dedicated vacuum work see our red natural rubber vacuum tubing.
Can it carry oil or fuel?
No. Natural rubber swells in oils, fuels and solvents. Use it for water, air, gas and dilute acids.
Can I use it outdoors?
Yes, it works indoors and outdoors and stays flexible down to -65°C, though long exposure to strong sunlight will age natural rubber over time.
Need help choosing the right size? Contact our team for advice.
Product details
| SKU | IP-RNRT-3X4.5-RED |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Red Natural Rubber Tubing – 45 Shore A Flexible Hose – 10m Roll