
Rubber & FoamSKU IP-RCP-88X17-1-BLACK
Rubber Cable Protector – 88mm x 17mm – Single Length
Price shown updates with the option you pick.
This rubber cable protector measures 88mm wide x 17mm high and has one 13mm round channel, so a single power or data lead can cross an office, corridor or server room floor without creating a trip hazard. It is sold as one piece in your chosen length of 1m, 1.5m, 3m or 9m, in black or grey.
At a glance
- 88mm x 17mm low-profile floor cable cover with tapered edges
- One 13mm diameter cable hole for a single lead
- Snap-fit base slit: push the cable in from underneath, no threading
- NR/SBR rubber, 75 Shore A, with shape memory that grips the cable
- Fire tested to BS 476 Part 7 Class 3; halogen free, low smoke
- UV stable for outdoor use; black or grey finish
Typical uses
- Covering trailing leads across office walkways and open-plan floors
- Routing data and power cables in server rooms and print rooms
- Temporary cable runs at exhibitions and events
- Protecting a single extension lead across corridors in commercial buildings
Which one do I need?
| One lead up to 13mm | This 88mm x 17mm rubber cable protector |
| Flatter cables, lower profile | Our 98mm x 13mm rubber cable protector with a 16mm x 10mm channel |
| Several small cables | Our 83mm x 14mm multi-compartment or 108mm x 14mm two-channel protectors |
| Thicker cables or hoses up to 23mm | Our 127mm x 28mm rubber cable protector |
Technical drawing
Specification
| Overall size | 88mm wide x 17mm high |
| Cable hole | 13mm diameter, one channel |
| Material | Natural rubber / SBR blend |
| Hardness | 75 ±5 Shore A |
| Colours | Black, grey |
| Lengths | 1m, 1.5m, 3m, 9m (one piece) |
| Fire rating | Tested to BS 476 Part 7 Class 3 |
| Electrical test | BS 903 Part C5, 500V |
| Halogens | None; low smoke |
How much do I need?
Measure the full route the cable crosses, from wall or desk to wall or desk, and choose the next length up. Example: a lead crossing a 2.4m corridor needs the 3m length, leaving 300mm spare at each end. A 7m run across an open-plan office takes the 9m length. For runs over 9m, butt two lengths tightly together.
Fitting tips
- Lay the protector flat for a few hours at room temperature before fitting.
- Clean and dry the floor so the protector sits flat and does not creep.
- Open the base slit with your fingers and press the cable up into the 13mm hole.
- Cut to length with a sharp utility knife if needed, square across the profile.
Complete your project
- Rubber Cable Protector – 98mm x 13mm – 1m to 9m Lengths
- Multi-Compartment Cable Protector – 83mm x 14mm
- Rubber Cable Protector – 127mm x 28mm, 23mm Hole
Questions
What size cable fits this rubber cable protector?
One round cable up to 13mm in diameter, such as a standard extension lead or a network cable.
Do I have to thread the cable through from the end?
No. Open the slit in the base and push the cable up into the channel; the rubber closes around it.
Can wheelchairs and trolleys cross it?
Yes. At 17mm high with tapered edges it is a low floor cable cover suited to pedestrian routes, wheelchairs and light trolleys.
Can it be used outdoors?
Yes. The rubber is UV stable for outdoor use, for example at events.
Is it fire tested?
Yes, to BS 476 Part 7 Class 3, and the compound contains no halogens.
Need help choosing a cable protector? Contact our team.
Product details
| SKU | IP-RCP-88X17-1-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector – 88mm x 17mm – Single Length