
Rubber & FoamSKU IP-TPEP-50X20-STD
TPE P Seal – 50mm x 20mm Black P Profile Extrusion – 25m Coil
This TPE P seal 50mm x 20mm is a black P profile extrusion with a 50mm flat flange and a 20mm hollow bead, used to make watertight, draught-proof seals on doors, window frames, glazing and industrial enclosures. It is sold as one continuous 25m coil that you cut to length.
At a glance
- P section: 50mm flange with a 20mm diameter hollow bead
- 4mm material thickness
- Thermoplastic elastomer (TPE), 70° Shore A
- Non-marking black finish
- Good shape memory under repeated compression
- Working temperature -40°C to +90°C
- Supplied as a 25m coil
Typical uses
- Sealing industrial and architectural doors and window panels
- Watertight glazing seals in the glass industry
- Sealing electrical and equipment enclosure doors
- Door and panel seals on vehicles and trailers
- Seals on food processing equipment enclosures
Which one do I need?
| P seal | Flange x bead | Best for |
|---|---|---|
| Hollow P section rubber seal | 27.7mm x 12.7mm | Small doors, hatches and narrow gaps |
| TPE P seal (this item) | 50mm x 20mm | Medium doors, glazing and enclosures with a wide fixing face |
| TPE P extrusion seal | 75mm x 40mm | Large doors and gaps that need a big bead |
Technical drawing
Specification
| Profile | P section (flange with hollow bead) |
| Flange length | 50mm |
| Bead diameter | 20mm |
| Material thickness | 4mm |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 70° Shore A |
| Colour | Black, non-marking |
| Temperature range | -40°C to +90°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Unit of sale | 25m coil |
How much do I need?
Measure the full perimeter of each door, window or enclosure opening and add about 5% for corners and trimming. Example: a 2000mm x 800mm enclosure door sealed on all four sides needs 2 x (2.0 + 0.8) = 5.6m, plus 5% = about 5.9m, so one 25m coil seals four doors of that size. A 1200mm x 1000mm window panel needs about 4.6m, so a coil covers five panels.
Fitting tips
- Clean, dry and degrease the fixing face before fitting.
- Fix the flat 50mm flange to the frame and position the bead where the door or panel closes onto it.
- Lay the seal in its natural shape without stretching it, so it does not shrink back later.
- Check the bead compresses evenly all round when closed; adjust hinges or keepers if one side is tight.
- Cut with sharp shears or a utility knife for a clean, square end at joints.
Complete your project
- TPE P Extrusion Seal – Black – 75mm x 40mm – 25m Coil
- Hollow P Section Rubber Seal – 27.7mm Wide x 12.7mm High
- TPE Sponge D Profile – 25mm x 14mm Adhesive Backed – 25m Coil
Questions
What does 50mm x 20mm mean on this TPE P seal?
The flat fixing flange is 50mm long and the hollow round bead is 20mm in diameter; the material is 4mm thick.
Can it be used outdoors?
Yes. TPE is waterproof and suitable for exterior door and window seals, working from -40°C to +90°C.
Will it mark painted or glazed frames?
No. The TPE compound is non-marking.
Will the bead flatten over time?
TPE has good shape memory, so the bead recovers its shape after repeated opening and closing.
How do I cut it?
Sharp shears or a utility knife cut it cleanly to the lengths you need.
Not sure which size you need? Contact our team and we will help you choose.
Product details
| SKU | IP-TPEP-50X20-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE P Seal – 50mm x 20mm Black P Profile Extrusion – 25m Coil