
Rubber & FoamSKU IP-TPED-25X14-STD
TPE Sponge D Profile – 25mm x 14mm Adhesive Backed – 25m Coil
This TPE sponge D profile 25mm x 14mm is a large self-adhesive hollow D seal and impact buffer for closing 7.5mm to 13mm gaps on industrial doors, hatches, windows and machine enclosures. It is sold as one continuous 25m coil, with a firm solid TPE base carrying the adhesive and a soft TPE foam D bulb that compresses to make the seal.
At a glance
- Hollow D section, 25mm wide x 14mm high
- Dual hardness: solid 30° Shore D base, soft 15° Shore A foam bulb
- Seals clearances from 7.5mm to 13mm at about 25% compression
- 2.5mm solid base with factory-applied self-adhesive backing
- Working temperature -50°C to +75°C
- Weather and UV resistant thermoplastic rubber (TPE), fully recyclable
- Supplied as a 25m coil, about 100g per metre
Typical uses
- Weather and dust seal on industrial door and window frames
- Closing wider gaps around machine enclosure and cabinet doors
- Seal and soft stop on access hatches and inspection covers
- Impact buffer on equipment edges, guards and lids
- Gap filling on vehicle and marine hatches
Which one do I need?
| Profile | Size (W x H) | Gap it seals | Supplied as |
|---|---|---|---|
| TPE sponge D profile, small | 10mm x 8mm | 6mm to 8mm | 100m coil |
| TPE sponge D profile (this item) | 25mm x 14mm | 7.5mm to 13mm | 25m coil |
| TPE sponge seal, square-backed | 14mm x 20mm | deeper gaps | 50m coil |
Technical drawing
Specification
| Profile | Hollow D, self-adhesive |
| Size | 25mm wide x 14mm high |
| Base | Solid TPE, 30° Shore D, 2.5mm thick |
| D bulb | TPE foam, 15° Shore A, 2mm wall |
| Gap range | 7.5mm to 13mm (about 25% compression) |
| Colour | Black |
| Temperature range | -50°C to +75°C |
| Weight | 100g per metre |
| Tolerance | ISO 3302-1 E2 / L2 |
| Unit of sale | 25m coil |
How much do I need?
Measure the perimeter of every opening and add about 5% for corners and trimming. Example: an access hatch of 1000mm x 800mm sealed on all four sides needs 1.0 + 1.0 + 0.8 + 0.8 = 3.6m, plus 5% = about 3.8m, so one 25m coil seals six hatches of that size. A 2100mm high personnel door sealed on both sides and the head (900mm) needs about 5.1m, so a coil covers four doors.
Fitting tips
- Clean and degrease the surface and let it dry fully before peeling the liner.
- Fit indoors at room temperature where possible for the best adhesive bond.
- Peel the liner gradually as you go and never stretch the seal while laying it.
- Press firmly along the full width of the solid base, not on the foam bulb.
- Check the closed gap: the bulb should squash by 1mm to 3.5mm for a good seal without straining hinges or latches.
Complete your project
- TPE Sponge Seal – 14mm x 20mm with Adhesive Backing – 50m Coil
- TPE Sponge D Profile – 10mm x 8mm Adhesive Backed – 100m Coil
- Extruded Sponge Strip 12.5 x 25mm – Black EPDM Sponge
Questions
What gap does the 25mm x 14mm D profile fill?
It is made for clearances between 7.5mm and 13mm, using about 25% compression of the foam bulb to seal against surface irregularities.
Can it be used outdoors?
Yes. TPE resists weathering and UV and stays flexible from -50°C to +75°C.
Why is the base harder than the bulb?
The firm 30° Shore D base keeps the strip straight and gives the adhesive a stable surface, while the soft 15° Shore A foam bulb compresses easily.
Do I need glue or fixings?
No. The adhesive is factory applied to the base; on a clean, dry surface firm hand pressure is enough.
Is it recyclable?
Yes. Both parts are thermoplastic elastomer, which can be recycled at the end of its service life.
Not sure which size you need? Contact our team and we will help you choose.
Product details
| SKU | IP-TPED-25X14-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Sponge D Profile – 25mm x 14mm Adhesive Backed – 25m Coil