
Rubber & FoamSKU IP-TPEP-45X28-STD
TPE P Extrusion Seal – Black – 45mm x 28mm – 25m Coil
This black TPE P extrusion 45mm x 28mm is a P-section compression seal for doors, hatches, panels and enclosures, sold as one continuous 25m coil. The 45mm overall width gives a flat fixing flange, and the 28mm hollow round bead squashes against the closing face to make a weather-tight, dust-tight seal.
At a glance
- P seal profile: 45mm overall width, 28mm hollow bead, 4mm wall
- Thermoplastic elastomer (TPE) rubber seal, 70 Shore A
- Good shape memory: the hollow bead springs back after every closing
- Non-marking compound, kind to painted and stainless frames
- Works from -50°C to +95°C, indoors or out
- Black, one continuous 25m coil for long runs without joints
Typical uses
- Door and hatch seals on cabinets, kiosks and equipment housings
- Enclosure and control-panel door gaskets
- Sealing glass and sheet panels in frames
- Dust and draught seals on machine guards and access doors
- Weather seals on outdoor cabinets and plant rooms
Which one do I need?
| TPE P seal size | Best for |
|---|---|
| 40mm x 21mm (white, food contact) | Hygienic doors and food equipment where a white seal is wanted |
| 45mm x 28mm (this product) | Gaps of roughly 10-20mm on cabinet, hatch and enclosure doors |
| 50mm x 30mm | Slightly larger gaps and heavier doors |
| 65mm x 25mm | Wide fixing faces where a longer flange is needed |
Technical drawing
Specification
| Profile | P section: flat flange with hollow round bead |
| Overall width | 45mm |
| Bead diameter | 28mm |
| Wall thickness | 4mm |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 70 Shore A |
| Operating temperature | -50°C to +95°C |
| Tolerance class | ISO 3302-1 E2 / L2 |
| Colour | Black |
| Unit of sale | One 25m coil |
How much do I need?
Measure round every edge the seal will run along and add about 5% for trimming and corners. Example: a cabinet door 1800mm x 900mm has a perimeter of 5.4m; four doors need 21.6m, plus 5% = 22.7m, so one 25m coil of the 45mm x 28mm P seal covers the job.
Fitting tips
- Fit the flange to the frame and leave the bead facing the closing door so it is squeezed, not dragged.
- Aim to compress the 28mm bead by about a quarter to a third; much more and the door may not latch.
- Clean the fixing face with solvent first if bonding, or fix with rivets or a retaining strip through the flange.
- Cut square with a sharp knife and butt the ends tightly at corners, or notch the flange to bend round.
Complete your project
- White TPE P Extrusion – Food Contact Grade – 40mm x 21mm – 25m Coil
- TPE P Extrusion – 65mm Flange, 25mm Bead – 25m Coil
- Silicone P Extrusion – Food Contact Grade – 36mm x 14mm – 25m Coil
Questions
What is a P seal?
A P seal, or P extrusion, has a flat flange that fixes to the frame and a hollow round bead that compresses when the door or hatch closes. Seen end-on it looks like the letter P.
What gap does the 45mm x 28mm P seal suit?
It suits gaps of roughly 10-20mm, where the 28mm bead is compressed by a quarter to a half. For smaller gaps choose the 40mm x 21mm size.
Can this TPE P extrusion be used outdoors?
Yes. TPE resists weather and stays flexible from -50°C to +95°C, so it suits outdoor cabinets and plant room doors.
Will it mark my door frames?
No. The TPE compound is non-marking, so it will not leave black marks on paintwork or stainless steel.
Not sure which size you need? Contact our team and we will be glad to help.
Product details
| SKU | IP-TPEP-45X28-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE P Extrusion Seal – Black – 45mm x 28mm – 25m Coil