
Shower Seals & Spares
Shower Screen Seal - 4-6mm Glass, Twin Angled Legs, 15mm
Price shown updates with the option you pick.
What this seal is
A clear shower screen seal for 4–6mm glass that closes gaps of 10mm to 15mm. The rigid PVC channel simply pushes onto the edge of the glass — no adhesive, no screws, no drilling — and grips glass of 4mm, 5mm or 6mm on its own, while the soft sealing section reaches across the gap and keeps the water inside your enclosure.
It's most commonly fitted along the bottom horizontal edge of a bath screen or shower door, and works just as well vertically on the upright of the glass, sealing between the glass and the tiles or wall.
Specification
| Fits glass thickness | 4mm – 6mm |
| Seals gaps of | 10mm – 15mm |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC channel with soft sealing section |
| Fitting | Push-fit — no adhesive, screws or tools required |
| Sold as | Single length |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily trimmed to length at home |
Why fit this seal
Stops leaks and protects floors. A worn, discoloured or missing seal is the most common cause of water pooling outside the shower. Replacing it takes minutes and protects flooring, skirting and plaster from long-term water damage.
No adhesive, no mess. The channel grips 4–6mm glass on its own — it slides straight on and can be removed or repositioned without leaving residue on the glass.
Barely visible once fitted. The clear PVC blends into the glass, so the seal does its job without changing the look of your enclosure.
UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.
Fitting in three steps
1. Measure. Check your glass is 4–6mm thick, measure the edge to be sealed, and confirm the gap to close is between 10mm and 15mm.
2. Choose. Pick the nearest length at or above your measurement — or use our custom cutting service and it arrives ready to fit.
3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the seal faces the gap. Done — no tools, no adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Shower Screen Seal - 4-6mm Glass, Twin Angled Legs, 15mm
