
Shower Seals & Spares
Shower Screen Seal - 4-6mm Glass, Carrier with T-Slot Groove
Price shown updates with the option you pick.
What this seal is
A clear carrier seal for 4–6mm glass. The rigid PVC U-channel simply pushes onto the edge of the glass — no adhesive needed — and various T-shaped channel seals can then slide into its groove, letting you seal a gap where a standard one-piece seal will not work.
It is commonly fitted along the bottom horizontal section of a bath screen or shower door, and works just as well vertically on the upright of the glass to create a seal between the glass and the tiles or wall.
Choose your length
Available in 800mm, 900mm, 1400mm or 2000mm lengths and easily cut down at home. If your glass edge sits between two sizes, order the next length up and trim it — or use our custom cutting service and it arrives ready to fit.
Specification
| Fits glass thickness | 4mm, 5mm or 6mm |
| Seal type | Carrier channel — accepts T-shaped seals in its groove |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section |
| Fitting | Push-fit — no adhesive required |
| Sold as | Single length |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily cut to the length you require |
Why fit this seal
Solves awkward gaps. When a standard seal will not close the gap, this carrier lets you slot in the T seal depth you need — one channel, many options.
No adhesive, no mess. The U-channel grips 4–6mm glass on its own — it slides straight on and can be removed without leaving residue.
Easy replacement later. When the T seal eventually wears, slide a fresh one into the same channel instead of replacing the whole seal.
UK stock, fast dispatch. Order before 2pm and your seal is dispatched the same working day.
Fitting in three steps
1. Measure. Check your glass is 4–6mm thick, measure the edge to be sealed, and measure the gap you need to close.
2. Choose. Pick the nearest length at or above your measurement, plus the T seal to suit your gap.
3. Fit. Remove the old seal, trim the channel to length if needed, push it onto the edge of the glass, then slide the T seal into the groove. No tools, no adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Shower Screen Seal - 4-6mm Glass, Carrier with T-Slot Groove
