Shower Screen Seal - 8-10mm Glass, 20mm Angled Fin

What this seal is

A clear replacement seal for shower doors and bath screens with 8–10mm glass. The rigid PVC U-section simply pushes onto the edge of the glass — no adhesive required — and seals wide gaps of 15mm to 20mm between the glass and the bath, tray, wall or tiles.

You'll most often find this style of seal fitted horizontally along the bottom edge of a bath screen or shower door, but it works just as well vertically on the upright edge of the glass to close the gap to the wall or tiles.

Specification

Why fit this seal

Stops leaks and protects your bathroom. A worn, discoloured or missing seal is the most common cause of water pooling outside the shower or bath. Replacing it takes minutes and protects flooring, skirting and plaster from long-term water damage.

No adhesive, no mess. The U-section grips 8–10mm glass on its own — it slides straight onto the edge and can be removed or repositioned without leaving residue.

Four lengths, cut to fit. Choose the nearest length at or above your measurement and trim it down at home for a perfect edge-to-edge fit, or use our custom cutting service and it arrives ready to fit.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick, measure the length of the glass edge you're sealing, and measure the gap you need to close (15–20mm for this profile).

2. Choose. Pick the nearest length at or above your measurement — 800mm, 900mm, 1400mm or 2000mm.

3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the seal closes the gap. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.