Rubber & FoamSKU IP-SILP-10.5X13-BLACK
Silicone L Profile – 10.5mm x 13mm – 25m Coil
This silicone L profile 10.5mm x 13mm is a chunky, thick-walled rubber angle that caps square corners on panels, cabinets, guards and enclosures, cushioning knocks and closing small gaps. It is sold per 25m coil in seven colours.
At a glance
- Overall size 10.5mm wide x 13mm high
- Very thick walls: 5.5mm upright leg and 8.3mm base, leaving a small corner notch
- 60 Shore A silicone rubber angle trim - flexible but firm
- Food-contact compliant to FDA 21 CFR 177.2600 and EC 1935/2004; WRAS approved
- Working range -50°C to +180°C, resistant to UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow; 25m coil
Typical uses
- Rubber corner protector on stainless cabinets, machine guards and enclosure lids
- Edge seal and bump strip on food and beverage processing equipment
- Cushioned corner trim on glass, acrylic and sheet-metal panels
- Colour-coded edge finishing in cleanrooms, labs and hygiene zones
- Seal strip on potable water equipment and housings
Which one do I need?
| Profile | Best for |
|---|---|
| 10mm x 9.5mm | Lighter corner trim where a slimmer profile is enough |
| 10mm x 12mm | Similar height with thinner walls, easier to bend round curves |
| 10.5mm x 13mm (this one) | Heavy-duty corner cushion with thick 5.5mm and 8.3mm walls |
| 12mm x 13mm stepped | Stepped edge protector for slightly larger corners |
Technical drawing
Specification
| Profile | L / angle, thick-walled |
| Overall size | 10.5mm wide x 13mm high |
| Wall thickness | 5.5mm (upright leg) and 8.3mm (base) |
| Material | Silicone rubber |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | 25m coil |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming. The top and two front edges of a 1200mm x 900mm cabinet need 1.2 + 0.9 + 0.9 = 3.0m, so one 25m coil covers around eight cabinets.
Fitting tips
- Clean and degrease the edge first so the trim seats fully into the corner notch
- Cut with a sharp knife or shears and keep the cut square for neat butt joints
- Do not stretch the profile as you fit it - it will shrink back and leave gaps
- For a permanent or watertight fit, bond it with a silicone sealant or a compatible adhesive
Complete your project
- Silicone L Profile – 10mm x 12mm – 25m Coil
- Silicone L Profile – 12mm x 13mm Stepped Edge Protector – 25m Coil
- Silicone L Profile – 15mm x 14mm, 5mm Wall – 10m or 25m Coil
Questions
What size corner does the notch fit?
The notch is roughly 5mm by 4.7mm, so the profile sits over the corner of sheet or panel material and cushions it with thick rubber on both faces.
Is this rubber angle trim food safe?
Yes. The silicone compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and is WRAS approved for drinking water.
Can it be used outdoors or near heat?
Yes. Silicone resists UV, ozone and weathering and works from -50°C to +180°C.
Which colours are available?
Black, blue, green, red, translucent, white and yellow, all at the same price per 25m coil.
Need help choosing a profile or colour? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-SILP-10.5X13-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 10.5mm x 13mm – 25m Coil