Rubber & FoamSKU IP-SILP-10X10-BLACK
Silicone L Profile – 10mm x 10mm, Heavy 5mm Wall – 25m Coil
This silicone L profile 10mm x 10mm has a heavy 5mm wall, making it one of the toughest small angle trims for guarding corners on sheet metal, enclosures, glass and machine panels. It is sold as a 25m coil in a choice of seven colours.
At a glance
- Equal-leg rubber angle trim: 10mm x 10mm
- Solid 5mm wall – far stiffer than thin-wall L sections
- 60 Shore A silicone: flexible enough to follow gentle curves
- Working range -50°C to +180°C
- Food-contact and potable-water compliant silicone
- Resists UV, ozone and weathering
- Seven colours, one colour per 25m coil
Typical uses
- Heavy-duty corner protector on machine guards and enclosures
- Edge seal on access doors and inspection hatches
- Impact strip on glass and polycarbonate panel corners
- Edge trim on food and drink processing equipment
- Heat-resistant angle seal around ovens and drying cabinets
Which one do I need?
| Profile | Best for |
|---|---|
| 10mm x 10mm, 1.5mm wall | Light edge cover where a slim, very flexible trim is wanted |
| 10mm x 10mm, 5mm wall (this item) | Corners that take knocks and need a solid, hard-wearing section |
| 10mm x 12mm | Edges that need a slightly taller leg |
| 12mm x 10mm, 70 Shore A | A firmer compound with a wider face |
Technical drawing
Specification
| Product | Silicone L profile (angle trim) |
| Width | 10mm |
| Height | 10mm |
| Wall thickness | 5mm |
| Material | Silicone rubber |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Compression set (22 h at 175°C) | 31% |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Unit of sale | 25m coil |
How much do I need?
Add up the length of every edge to cover and allow 5% for trimming. Example: a machine with 8 guard panels, each needing 2 x 1.2m edges, needs 8 x 2 x 1.2m = 19.2m, plus 5% = about 20.2m – one 25m coil. For 40m of edging you would need two coils.
Fitting tips
- Clean and degrease the edge so the adhesive can grip.
- Bond the inside faces of the angle with a silicone adhesive for a permanent fix.
- Cut square with a sharp blade in a single stroke; the thick wall cuts cleanly.
- Mitre the ends at 45° where two runs meet at a corner for a neat finish.
Complete your project
- Silicone L Profile – 10mm x 10mm, Thin 1.5mm Wall – 25m Coil
- Silicone L Profile – 12mm x 10mm, Firm 70 Shore A – 25m Coil
- Silicone L Profile – 15mm x 12mm – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this heavy-wall angle trim food safe?
Yes. The silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
How is it different from the thin-wall 10mm x 10mm profile?
This version has a 5mm wall, so it is much stiffer and stands up better to knocks; the thin-wall version is lighter and bends more easily.
Can the corner protector be used outdoors?
Yes. Silicone resists UV, ozone and weathering.
Is it suitable for drinking water equipment?
Yes. The material is WRAS approved for potable water use.
How do I fix it?
Use a silicone adhesive on a clean, dry edge for a lasting bond.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-10X10-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 10mm x 10mm, Heavy 5mm Wall – 25m Coil