Rubber & FoamSKU IP-SLP-11X10X5-BLACK-10
Silicone L Profile – 11mm x 10mm, 5mm to 6mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 11mm x 10mm has an unusually thick 5mm to 6mm wall and a rounded outer corner, making it a compact but very tough edge protector and corner seal. It is sold per coil, in 10m or 25m lengths, in seven colours.
At a glance
- Compact rubber angle trim: 11mm by 10mm outside, 5mm to 6mm wall
- Rounded outer corner for a smooth, snag-free edge
- Silicone, 60° Shore A, food-contact compliant (FDA 21 CFR 177.2600, EC 1935/2004)
- WRAS approved for potable and public water supplies
- Working temperature -50°C to +180°C; resists UV, ozone and weathering
- Free from TSE/BSE-derived ingredients and phthalates
- Black, blue, green, red, translucent, white or yellow
Typical uses
- Impact-resistant edge protector for sheet metal, glass and panel corners
- Corner seal on doors, enclosures and machine guards against dust and splashes
- Hygienic edging on food and drink processing equipment
- Water treatment and potable water equipment
- Colour-coded edging in cleanrooms, laboratories and HVAC plant
Which one do I need?
| Profile | Character | Best for |
|---|---|---|
| 11mm x 10mm (this profile) | 5mm to 6mm wall, rounded corner | Small edges that take knocks and need a solid feel |
| 10mm x 10mm, heavy wall | 5mm wall, equal legs | Equal-leg corners with similar toughness |
| 10mm x 10mm, thin wall | 1.5mm wall | Light, flexible trim on curves and thin edges |
| 12mm x 10mm, firm | 70° Shore A | Where a harder, more rigid section is preferred |
Technical drawing
Specification
| Profile | L (angle), rounded outer corner |
| Outside dimensions | 11mm x 10mm |
| Wall thickness | 5mm to 6mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Unit of sale | Per coil, 10m or 25m |
How much do I need?
Measure every edge to be covered and add about 2% for trimming. Example: four machine guard panels, each with 2.2m of exposed edge, need 8.8m plus about 0.2m for trimming, so one 10m coil is enough. For more than about 9.5m of edge, choose the 25m coil.
Fitting tips
- Clean and degrease the edge first so the trim seats fully into the corner.
- Because the wall is thick, bend it round corners gently or mitre it at 45° for a neat joint.
- Cut with a sharp knife in one firm stroke for a square end.
- For a permanent or watertight fit, bond with a compatible silicone sealant along the inner faces.
Complete your project
- Silicone L Profile – 10mm x 10mm, Heavy 5mm Wall
- Silicone L Profile – 12mm x 10mm, Firm 70 Shore A
- Silicone L Profile – 10mm x 10mm, Thin 1.5mm Wall
Data sheet
Download the technical data sheet (PDF)
Questions
Is this thick-wall silicone edge trim food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, and it is WRAS approved for potable water.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
Will it fit thin sheet edges?
It sits over the corner rather than gripping the sheet, so bond it with sealant on thin edges; for a push-on grip, an edge trim or U channel is better.
How do I fix the profile in place?
Push it over the corner for light protection, or bond it with a compatible silicone or polyurethane sealant for a permanent seal.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-SLP-11X10X5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 11mm x 10mm, 5mm to 6mm Wall – 10m or 25m Coil