Rubber & FoamSKU IP-SILP-17X13X3-BLACK-10
Silicone L Profile – 17mm x 13mm, 3mm to 12mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile, 17mm x 13mm, is a chunky stepped angle extrusion for protecting and sealing edges and corners on food, pharmaceutical and general industrial equipment. It combines a solid 12mm-wide block with a thin 3mm flange, is made from 60 Shore A silicone, and is sold as a 10m or 25m coil in seven colours.
At a glance
- Silicone L profile 17mm wide x 13mm high
- Stepped section: solid 12mm x 13mm block with a 3mm fixing flange
- 60 Shore A silicone rubber, -50°C to +180°C
- Food-contact compliant (FDA 21 CFR 177.2600, EC 1935/2004) and WRAS approved
- Good resistance to UV, ozone and weathering
- Silicone edge trim and rubber corner seal in 10m or 25m coils, seven colours
Typical uses
- Edge protection and step seals on food and beverage processing machinery
- Sealing doors, hatches and enclosures in hygienic and washdown areas
- Rubber angle trim for panels where a thick, impact-absorbing edge is needed
- Seals near potable water systems
- Colour-coded edge finishing in laboratories, cleanrooms and HVAC equipment
Which one do I need?
| Need | Suggested profile |
| Tall, solid step with a thin flange to fix under a panel | This 17mm x 13mm silicone L profile |
| Wider, lower step seal | Silicone L profile 22mm x 10mm |
| Medium edge trim on panels and guards | Silicone L profile 12.5mm x 7.5mm |
| Small, discreet angle seal | Silicone L profile 10mm x 5mm |
| 10m or 25m coil | 10m for one enclosure or repair; 25m for production runs or several machines |
Technical drawing
Specification
| Material | Silicone rubber |
| Size | 17mm wide x 13mm high |
| Wall | 3mm flange, 12mm solid block |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Compression set (22 h at 175°C) | 31% |
| Rebound resilience | 59% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
Download the technical data sheet (PDF)
How much do I need?
Add up the length of every edge to be covered and allow about 5% for trimming. Example: the four top edges of a 2m x 1.5m machine enclosure total 7m, plus 5% = 7.4m, so one 10m coil covers it with spare; three identical enclosures (22.1m) fit within a 25m coil.
Fitting tips
- Clean, dry and degrease the mounting surfaces first.
- Lay the 3mm flange flat on the panel face so the solid block sits along the edge to be protected.
- For a permanent or watertight joint, bond with a silicone or polyurethane adhesive.
- Lay the profile in relaxed, without stretching, and cut to length afterwards.
- Cut square with a sharp blade; mitre corners for a closed joint.
Complete your project
- Silicone L Profile – 22mm x 10mm – 10m or 25m Coil
- Silicone L Profile – 12.5mm x 7.5mm – 25m Coil
- Silicone L Profile – 10mm x 5mm – 25m Coil
Questions
Is this silicone edge trim safe for food contact?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food-contact use.
Can it be used near drinking water?
Yes, the material is WRAS approved for potable water applications.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so it suits outdoor enclosures and transport equipment.
What temperatures can it handle?
It stays flexible from -50°C to +180°C, so it suits ovens, chillers and washdown areas.
How does it differ from the 22mm x 10mm profile?
This 17mm x 13mm corner seal is taller with a thinner flange; the 22mm x 10mm is wider and lower with a 5mm base.
Need help choosing a silicone L profile? Contact our team for advice.
Product details
| SKU | IP-SILP-17X13X3-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 17mm x 13mm, 3mm to 12mm Wall – 10m or 25m Coil