Rubber & FoamSKU IP-SILP-17X9X3-BLACK-10
Silicone L Profile – 17mm x 9mm, 3mm to 12mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile, 17mm x 9mm, is a solid stepped extrusion for protecting and sealing edges, steps and corners on food, pharmaceutical and general industrial equipment. It combines a 12mm wide x 9mm high block with a 3mm thick flange, is made from 60 Shore A silicone, and is sold as a 10m or 25m coil in seven colours.
At a glance
- Silicone L profile 17mm wide x 9mm high
- Stepped solid section: 12mm block and 3mm flange, flat base
- 60 Shore A silicone rubber, -50°C to +180°C
- Food-contact compliant (FDA 21 CFR 177.2600, EC 1935/2004) and WRAS approved
- Seven colours: black, blue, green, red, translucent, white and yellow
- Silicone edge trim and step seal on 10m or 25m coils
Typical uses
- Edge protection for glass, sheet metal and panels
- Step and corner seals on doors, hatches and machinery enclosures
- Food and beverage processing equipment
- Potable water and public water supply equipment
- Rubber angle trim in cleanrooms and laboratories
Which one do I need?
| Need | Suggested profile |
| Medium stepped seal, 9mm high with a 3mm flange | This 17mm x 9mm silicone L profile |
| Heavier step with a wider 22mm bearing face | Silicone L profile 22mm x 10mm |
| Lighter edge trim on panels and guards | Silicone L profile 12.5mm x 7.5mm |
| Small, discreet angle seal | Silicone L profile 10mm x 5mm |
Technical drawing
Specification
| Material | Silicone rubber |
| Size | 17mm wide x 9mm high |
| Section | 12mm x 9mm block with 3mm flange |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Compression set (22 h at 175°C) | 31% |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
Download the technical data sheet (PDF)
How much do I need?
Add up every edge or step to be covered and allow about 5% for trimming. Example: the top and side edges of two 900mm x 1500mm cabinet doors come to 2 x 3.9m = 7.8m, plus 5% = 8.2m, so a 10m coil covers it; four doors (16.4m with allowance) need a 25m coil.
Fitting tips
- Clean and degrease the mounting surface before fitting.
- Seat the flat base on the panel with the 9mm block against the edge to be protected.
- For a permanent or watertight joint, bond with a silicone or polyurethane adhesive sealant.
- Lay the profile in relaxed, without stretching, and cut to length afterwards.
- Mitre corners with a sharp blade for a neat, closed joint.
Complete your project
- Silicone L Profile – 22mm x 10mm – 10m or 25m Coil
- Silicone L Profile – 12.5mm x 7.5mm – 25m Coil
- Silicone L Profile – 10mm x 5mm – 25m Coil
Questions
Is this silicone edge trim safe for food contact?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food-contact use.
Can it be used near drinking water?
Yes, the material is WRAS approved for potable water applications.
What temperatures can it handle?
It stays flexible from -50°C to +180°C and resists UV, ozone and weathering.
Which coil length should I choose?
Pick 10m for a few doors or panels and 25m for longer runs; both are offered in all seven colours.
How do I fix it?
Bond the flat base with a silicone or polyurethane adhesive sealant for a permanent seal.
Need help choosing a silicone L profile? Contact our team for advice.
Product details
| SKU | IP-SILP-17X9X3-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 17mm x 9mm, 3mm to 12mm Wall – 10m or 25m Coil