Rubber & FoamSKU IP-SLP-19X19X3-BLACK-10
Silicone L Profile – 19mm x 19mm, 3mm to 6mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
A 19mm x 19mm silicone L profile with a 3mm to 6mm wall, made to cap and protect square edges on panels, guards, enclosures and glazing while forming a soft, hygienic seal. Each order is one continuous coil, 10m or 25m long, in a choice of seven colours.
At a glance
- 19mm x 19mm external size, 3mm to 6mm wall
- 20° Shore A silicone, flexible and quick to fit
- Working temperature -50°C to +180°C
- FDA compliant (21 CFR 177.2600) and WRAS approved
- Resists UV, ozone and weathering; free from phthalates
- Black, blue, green, red, translucent, white or yellow
- Sold per coil: 10m or 25m
Typical uses
- Edge protection on sheet metal, machine guards and enclosure panels
- Corner sealing on doors and hatches in food and drink processing
- Clean, wipeable edge finish in laboratories and cleanrooms
- Glass and acrylic panel edging where a soft contact face is needed
- Colour-coded edges for zoning or safety marking
Which one do I need?
| Wall thickness | Best suited to |
|---|---|
| Thin wall, 1–2mm | Light trim on glass, acrylic and thin sheet; neat cosmetic finish |
| Medium wall, 3–6mm (this profile) | General edge protection on panels, guards and cabinet doors |
| Thick wall, 7mm and over | Impact and knock protection on exposed corners and heavy equipment |
Technical drawing
Specification
| Material | Silicone |
| Profile | L section (angle) |
| Overall size | 19mm x 19mm |
| Wall thickness | 3mm to 6mm |
| Hardness | 20° Shore A |
| Tensile strength | 9 N/mm² |
| Elongation at break | 1000% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Add up the length of every edge you want to cover and allow about 5% for cutting and mitres. Example: three sides of a 2m x 1.5m machine-guard door is 2 + 1.5 + 2 = 5.5m, plus 5% = about 5.8m, so one 10m coil covers it with spare for a second, smaller panel. For runs over 10m, the 25m coil gives fewer joins.
Fitting tips
- Clean and degrease the edge first; silicone grips best on a dry surface.
- Cut with sharp shears or a fresh blade for a square, clean end; mitre corners at 45° for a tidy joint.
- Lay the profile on without stretching it, or it may shrink back and open the joints later.
- For a permanent or watertight fit, bond with a compatible silicone sealant or adhesive.
Complete your project
- Silicone L Profile – 15mm x 14mm, 5mm Wall – 10m or 25m Coil
- Silicone L Profile – 20mm x 15mm, 7mm to 10mm Wall – 10m or 25m Coil
- Silicone L Profile – 32mm x 20mm – 10m or 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Can I use it outdoors?
Yes. Silicone shrugs off UV, ozone and weather, so it will not crack or go brittle outside.
Is it safe for food areas?
Yes. The compound is FDA compliant for food contact and WRAS approved for drinking-water use.
Does it need adhesive?
On a well-matched edge it can be pressed on; for a permanent or sealed fit, bond it with a silicone sealant.
Which colour should I choose?
Black and white suit most equipment; translucent is discreet on glass; blue, green, red and yellow help with colour coding.
Not sure which size fits your edge? Contact our team with the panel thickness and we will help you choose.
Product details
| SKU | IP-SLP-19X19X3-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 19mm x 19mm, 3mm to 6mm Wall – 10m or 25m Coil