Rubber & FoamSKU IP-SILP-32X20-BLACK-10
Silicone L Profile – 32mm x 20mm – 10m or 25m Coil
Price shown updates with the option you pick.
This 32mm x 20mm silicone L profile is a thin-wall angle section that fits over corners and exposed edges to protect them from knocks and abrasion and to seal the joint. It is made from firm 70 Shore A silicone with a 2.5mm wall and is sold as one continuous coil, 10m or 25m long, in a choice of seven colours.
At a glance
- 32mm x 20mm unequal angle with a 2.5mm wall
- Firm 70 Shore A silicone that holds a crisp edge yet bends round corners
- Material complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact
- WRAS approved material for potable water applications
- Operating temperature range -50°C to +180°C
- Highly resistant to UV, ozone and outdoor weathering
- Seven colours: black, blue, green, red, translucent, white and yellow
Typical uses
- Protecting exposed edges of glass, sheet metal and panels
- Sealing around doors, enclosures and machinery
- Machinery guards and HVAC housings
- Food and beverage processing equipment
- Drinking water and public water supply installations
- Cleanroom and laboratory edge finishing, and colour-coding for identification
Which one do I need?
| Coil length | Best for |
|---|---|
| 10m coil | A single cabinet, door or machine guard; repairs and short runs |
| 25m coil | Several machines or doors, production lines and keeping stock; lower cost per metre |
Technical drawing
Specification
| Material | Silicone rubber |
| Width | 32mm |
| Height | 20mm |
| Wall thickness | 2.5mm |
| Hardness | 70 Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Tear strength | 31 N/mm |
| Operating temperature | -50°C to +180°C |
| Food contact | FDA 21 CFR 177.2600 and EC 1935/2004 compliant material |
| Potable water | WRAS approved material |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One continuous coil of the chosen length (10m or 25m) |
How much do I need?
Measure every edge you want to cover and add about 5% for corner cuts and trimming. Example: guarding the top and both side edges of four 1500mm x 1000mm machine panels needs 4 x (1.5m + 1.0m + 1.0m) = 14m, plus 5% = about 14.7m, so one 25m coil covers it with spare for maintenance. For a single panel (about 3.7m) one 10m coil is plenty.
Fitting tips
- Clean and dry the edge, removing any grease, before fitting.
- Cut to length with a sharp utility knife against a straight edge for a clean, square end.
- For simple edge protection the profile can be fitted without adhesive; for a secure or watertight seal, bond it with a compatible silicone or polyurethane adhesive sealant.
- Cut slightly long and push the ends together rather than stretching the profile into place.
- At outside corners, mitre the profile at 45° so the two lengths meet neatly.
Complete your project
- Silicone L Profile – 30mm x 19mm, 1.3mm Wall – 10m or 25m Coil
- Silicone L Profile – 30mm x 24mm – 10m or 25m Coil
- EPDM Rubber U Channel – 5.7mm x 17mm for 1.5-2.5mm Panels – Per Metre
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for food and drinking water applications?
Yes. The silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and is a WRAS approved material for potable water use.
Can it be used outdoors?
Yes. Silicone is highly resistant to UV, ozone and weathering, so it stays flexible outside.
Which leg goes where?
Either way round. Usually the 32mm leg sits on the larger face and the 20mm leg wraps the edge, but you can reverse it to suit the job.
Does it need adhesive?
Not for basic edge protection. Bond it with a silicone or polyurethane sealant where it must stay put or seal against water.
Is the price per metre?
No. The price is for one complete coil of the length you choose, 10m or 25m.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-SILP-32X20-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 32mm x 20mm – 10m or 25m Coil