Rubber & FoamSKU IP-SILP-20X11X3.7-BLACK-10
Silicone L Profile – 20mm x 11mm, 3.7mm to 4mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 20mm x 11mm, with a heavy 3.7mm to 4mm wall, is a flexible angle trim that pushes over exposed corners and panel edges to protect, cushion and seal them. It is sold per coil, in 10m or 25m lengths, in seven colours.
At a glance
- Unequal-leg rubber angle trim: 20mm by 11mm outside, 3.7mm to 4mm wall
- Solid silicone, 60° Shore A: firm enough to hold its shape, soft enough to cushion
- Food-contact compliant silicone (FDA 21 CFR 177.2600 and EC 1935/2004) and WRAS approved
- Working temperature -50°C to +180°C; resists UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow
- Supplied as a 10m or 25m coil; cut to length on site
Typical uses
- Edge protector for sheet metal, glass and panel edges on machinery and enclosures
- Corner seal around doors, hatches, cabinets and HVAC housings
- Hygienic edge trim on food and drink processing equipment
- Potable water plant and equipment where WRAS approval is required
- Colour-coded edging in cleanrooms, laboratories and production lines
Which one do I need?
| Profile | Wall | Best for |
|---|---|---|
| 20mm x 10mm | 1.5mm to 2mm | Light edge trim where flexibility matters more than impact protection |
| 20mm x 11mm (this profile) | 3.7mm to 4mm | Robust corner protection and sealing with a firm, durable section |
| 20mm x 9mm | 6mm to 8mm | Very heavy-duty edges that take repeated knocks |
| 20mm x 20mm | 2mm | Equal-leg corners where both faces need the same cover |
Technical drawing
Specification
| Profile | L (angle), unequal legs |
| Outside dimensions | 20mm x 11mm |
| Wall thickness | 3.7mm to 4mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Compression set | 31% (22 hours at 175°C) |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Unit of sale | Per coil, 10m or 25m |
How much do I need?
Measure every edge to be covered and add about 2% for trimming. Example: a cabinet front with two 1.2m sides and two 0.8m sides needs 4.0m, plus 0.1m for corners and trimming, so one 10m coil covers two such cabinets. For runs over 10m, or several machines, the 25m coil saves joins.
Fitting tips
- Clean and degrease the edge first so the trim seats fully into the corner.
- Cut with a sharp knife against a straight edge for a square, tidy end.
- Mitre the trim at 45° at outside corners for a neat, sealed joint.
- For a permanent or watertight fit, bond with a compatible silicone sealant along the inside of the angle.
Complete your project
- Silicone L Profile – 20mm x 10mm, 1.5-2mm Wall
- Silicone L Profile – 20mm x 9mm, 6mm to 8mm Wall
- Silicone L Profile – 20mm x 20mm, 2mm Wall
Data sheet
Download the technical data sheet (PDF)
Questions
Is this silicone edge trim suitable for outdoor use?
Yes. Silicone resists UV, ozone and weathering, so the profile stays flexible outdoors.
Can it be used on food processing equipment?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Which leg goes where?
Fit the 20mm leg on the face that needs the most cover and the 11mm leg on the return; the 4mm wall gives a firm hold either way.
Does it need adhesive?
For simple edge protection it usually push-fits. For a permanent or watertight seal, bond it with a compatible silicone sealant.
How do I cut the coil?
A sharp utility knife or shears gives a clean cut; mitre the corners at 45° for a neat finish.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-20X11X3.7-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 20mm x 11mm, 3.7mm to 4mm Wall – 10m or 25m Coil