Rubber & FoamSKU IP-SILP-20X10X2-BLACK-10
Silicone L Profile – 20mm x 10mm, 1.5-2mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This 20mm x 10mm silicone L profile is a light, flexible angle extrusion with a 1.5-2mm wall for capping exposed corners, sealing panel edges and finishing enclosures. Sold by the coil: choose a single 10m or 25m coil in one of seven colours.
At a glance
- Unequal L angle: 20mm and 10mm legs
- Slim wall: 2mm on the short leg, 1.5mm on the long leg
- 60 Shore A silicone, flexible and easy to cut
- Working temperature -50°C to +180°C
- Material meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact; WRAS approved
- Black, blue, green, red, translucent, white or yellow
- Supplied as one continuous 10m or 25m coil
Typical uses
- Edge protection on sheet-metal panels, guards and enclosures
- Sealing and finishing around doors, hatches, windows and frames
- Angle barriers on machinery, HVAC housings and ducting
- Food processing and food-handling equipment
- Potable water and public water supply installations
- Cleanrooms and laboratories, where a smooth trim limits dirt traps
Which one do I need?
| Profile | Best for |
| 20mm x 10mm, 1.5-2mm wall (this item) | Light edge capping and trims where a slim, flexible angle is wanted |
| 15mm x 11.5mm, 2mm wall | Smaller edges and tighter corners |
| 32mm x 20mm, 2.5mm wall | Wider faces and heavier-duty corner protection |
Technical drawing
Specification
| Material | Silicone |
| Profile | L angle, 20mm x 10mm |
| Wall thickness | 2mm (short leg), 1.5mm (long leg) |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Compression set (22h at 175°C) | 31% |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Operating temperature | -50°C to +180°C |
| Food contact | FDA 21 CFR 177.2600, EC 1935/2004 |
| Potable water | WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Measure every edge you want to cover and add them together, then allow about 5% for trimming and mitred corners. Example: a cabinet with a 600mm x 400mm door has a perimeter of 2 x (600 + 400) = 2,000mm. Four such doors need 8m, plus 5% = 8.4m, so one 10m coil covers the job. Twelve doors need about 25.2m, so order a 25m coil and a 10m coil, or two 25m coils if more doors are planned.
Fitting tips
- Cut square with a sharp knife or snips; mitre the ends at 45° for neat corners.
- Clean and dry the mounting surface before fitting.
- For light edge capping the profile can simply sit in place; for a secure or watertight joint bond it with a silicone sealant or a compatible adhesive.
- Do not stretch the profile while fitting; let it lie naturally so it does not shrink back from the corners.
Complete your project
- Silicone L Profile – 15mm x 11.5mm, 2mm Wall
- Silicone L Profile – 32mm x 20mm
- Silicone L Profile – 17mm x 14mm, Soft 40 Shore A
- Self-Grip EPDM Top Seal – 6mm x 15mm
Data sheet
Download the technical data sheet (PDF)
Questions
Is the material food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food-contact use.
Can it be used with drinking water?
Yes. The material is WRAS approved for potable water applications.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so it suits outdoor enclosures and equipment.
How is it different from the other 20mm x 10mm profile?
This version has a slightly slimmer 1.5mm long leg, making it a little lighter and more flexible; the outside size is the same.
Can I order a length other than 10m or 25m?
It is sold in full 10m or 25m coils only. For longer runs, combine coils.
Need help choosing a profile? Contact our team and we will advise.
Product details
| SKU | IP-SILP-20X10X2-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 20mm x 10mm, 1.5-2mm Wall – 10m or 25m Coil