Rubber & FoamSKU IP-LPSIL-23X17X8-BLACK-10
Silicone L Profile – 23mm x 17mm, 8mm to 12mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This heavy-wall silicone L profile protects and seals exposed corners, panel edges and equipment frames. The 23mm x 17mm section has an 8mm to 12mm wall, so it absorbs knocks and closes larger gaps than thin-wall angle trims. Made from FDA-compliant, WRAS-approved silicone, it suits food, beverage and potable water work. Sold per coil: choose a 10m or 25m coil in one of seven colours.
At a glance
- 23mm wide x 17mm high L-shaped profile
- Heavy 8mm to 12mm wall thickness
- Soft 40° Shore A hardness
- FDA compliant (21 CFR 177.2600) and WRAS approved
- Operating temperature range of -50°C to +180°C
- Seven colours for identification or colour-coding
Typical uses
- Protecting exposed edges on glass, sheet metal and panels
- Sealing doors, enclosures and HVAC machinery
- Food and beverage processing equipment
- Potable water systems and public water supplies
- Cleanrooms and laboratory environments
Which one do I need?
| Wall thickness | Best for |
|---|---|
| Thin (1mm to 2mm) | Light edge trim on glass and thin panels where a neat, low-profile finish matters |
| Medium (3mm to 6mm) | General corner protection and sealing on cabinets, guards and enclosures |
| Thick (7mm and over) – this profile | Impact absorption on heavy frames, larger gap closing and high-wear corners |
Technical drawing
Specification
| Material | Silicone |
| Profile dimensions | 23mm wide x 17mm high |
| Wall thickness | 8mm to 12mm |
| Hardness (Shore A) | 40° |
| Density | 1.12 g/cm³ |
| Tensile strength | 9.6 N/mm² |
| Elongation at break | 770% |
| Compression set | 36% (22 hours at 175°C) |
| Tear strength | 28 N/mm |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, WRAS |
| Unit of sale | Per coil, 10m or 25m |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming and mitred corners. Example: guarding four cabinet doors, each 600mm x 1800mm on all sides, needs 4 x 4.8m = 19.2m, plus 5% = about 20.2m, so one 25m coil covers the job with a spare length left over. Up to 9.5m of edging fits comfortably in a 10m coil.
Fitting tips
- Cut cleanly with a sharp knife or shears; mitre the corners at 45° for a neat finish.
- On many edges the profile can be pushed into place without adhesive.
- For a permanent or watertight seal, bond it with a compatible silicone sealant or primer and adhesive system.
- Clean and degrease the mounting surface and let it dry before bonding.
Complete your project
- Silicone L Profile – 10mm x 12mm – 25m Coil
- Silicone L Profile – 20mm x 10mm, 60 Shore A – 10m or 25m Coil
- Silicone L Profile – 12.5mm x 7.5mm – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for food contact?
Yes, the silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 requirements for food-contact applications.
Can it be used outdoors?
Yes, the silicone compound has excellent resistance to UV, ozone and weathering.
Is it suitable for drinking water applications?
Yes, the material is WRAS approved for use with potable water and public water supplies.
How flexible is the profile?
At 40° Shore A with 770% elongation at break, it is soft, flexible and shock-absorbing despite the heavy wall.
Will it bend around a corner?
The thick wall resists tight bends, so mitre the profile at sharp corners rather than folding it.
Need help choosing a size? Contact our team and we will be happy to advise.
Product details
| SKU | IP-LPSIL-23X17X8-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 23mm x 17mm, 8mm to 12mm Wall – 10m or 25m Coil