Rubber & FoamSKU IP-SLP-20X10-BLACK-10
Silicone L Profile – 20mm x 10mm, 60 Shore A – 10m or 25m Coil
Price shown updates with the option you pick.
This 20mm x 10mm silicone L profile is a flexible angle section that fits over corners and exposed edges to protect them and seal the joint. It is made from 60 Shore A silicone with a 2mm wall and is sold as one continuous coil, 10m or 25m long, in a choice of seven colours.
At a glance
- 20mm x 10mm unequal angle profile with a 2mm wall
- 60 Shore A silicone: flexible, shock-absorbing and resistant to compression set
- Material complies with FDA 21 CFR 177.2600 for food contact
- WRAS approved material for potable water applications
- Operating temperature range -50°C to +180°C
- Highly resistant to UV, ozone and outdoor weathering
- Seven colours: black, blue, green, red, translucent, white and yellow
Typical uses
- Guarding exposed edges of glass, sheet metal and panels against knocks and abrasion
- Sealing around doors, windows, frames and equipment enclosures to keep out water, air and dust
- Machinery guards and HVAC housings
- Food and beverage processing equipment
- Drinking water and public water supply installations
- Cleanroom and laboratory edge finishing, and colour-coding for identification
Which one do I need?
| Coil length | Best for |
|---|---|
| 10m coil | A single cabinet, door or machine guard; repairs and short runs |
| 25m coil | Several machines or doors, production lines and keeping stock; lower cost per metre |
Technical drawing
Specification
| Material | Silicone rubber |
| Width | 20mm |
| Height | 10mm |
| Wall thickness | 2mm |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Compression set (22 hours at 175°C) | 31% |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Operating temperature | -50°C to +180°C |
| Food contact | FDA 21 CFR 177.2600 compliant material |
| Potable water | WRAS approved material |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One continuous coil of the chosen length (10m or 25m) |
How much do I need?
Measure every edge you want to cover and add about 5% for corner cuts and trimming. Example: guarding the top front edge and both sides of three 1200mm x 900mm machine panels needs 3 x (1.2m + 0.9m + 0.9m) = 9m, plus 5% = about 9.5m, so one 10m coil covers it. For ten panels (about 31.5m) choose one 25m coil and one 10m coil.
Fitting tips
- Cut to length with a sharp utility knife or shears against a straight edge for a clean, square end.
- For simple edge protection the profile can be fitted without adhesive.
- For a secure or watertight seal, bond it with a compatible silicone or polyurethane adhesive sealant.
- Clean and dry the mounting surface before applying any adhesive.
- At outside corners, mitre the profile at 45° so the two lengths meet neatly.
Complete your project
- Silicone L Profile – 30mm x 19mm, 1.3mm Wall – 10m or 25m Coil
- Silicone L Profile – 30mm x 19mm, Tapered 0.5-1.3mm Wall – 10m or 25m Coil
- Neoprene Square U Channel – 4.5mm x 8.5mm – Black Rubber Edge Trim
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for food and drinking water applications?
Yes. The silicone complies with FDA 21 CFR 177.2600 for food contact and is a WRAS approved material for potable water use.
Can it be used outdoors?
Yes. Silicone is highly resistant to UV, ozone and weathering, so it keeps its flexibility outside.
Which leg goes where?
Either way round. Usually the 20mm leg sits on the larger face and the 10mm leg wraps the edge, but you can reverse it to suit the job.
Does it need adhesive?
Not for basic edge protection. Bond it with a silicone or polyurethane sealant where it must stay put or seal against water.
Is the price per metre?
No. The price is for one complete coil of the length you choose, 10m or 25m.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-SLP-20X10-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 20mm x 10mm, 60 Shore A – 10m or 25m Coil