Rubber & FoamSKU IP-SILP-38X38-BLACK-10
Silicone L Profile – 38mm x 38mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 38mm x 38mm is a heavy-section, equal-leg silicone angle extrusion that wraps over exposed edges and corners to protect, seal and finish them. Both legs measure 38mm with a solid 6.3mm wall, so this rubber angle trim is stiff enough to guard heavy panel corners, machine frames and enclosure edges against knocks while staying flexible enough to bend around gentle curves. It is sold by the coil: choose a 10m or 25m coil in black, blue, green, red, translucent, white or yellow.
At a glance
- Equal-leg silicone angle: 38mm x 38mm outside, 6.3mm wall
- Firm 70° Shore A silicone for a robust corner protector
- Operating range -50°C to +180°C
- Food-contact compliant (FDA 21 CFR 177.2600, EC 1935/2004) and WRAS approved
- Resists UV, ozone and outdoor weathering
- Seven colours for colour-coding and hygiene zoning
Typical uses
- Corner and edge protection on machine frames, guards and enclosures
- Rubber angle trim on panel edges in food and drink processing areas
- Sealing and finishing corners on cabinets, hoppers and ductwork
- Edge protector for glass and sheet-metal panels
- Colour-coded edge trim for hygiene zones in cleanrooms and laboratories
Which one do I need?
| Profile | Best for |
|---|---|
| Silicone L 30mm x 30mm, uniform 6mm wall | Slightly smaller equal-leg corner guard for lighter frames |
| Silicone L 38mm x 38mm, 6.3mm wall (this profile) | Heavy corners and edges up to about 31mm across each face |
| Silicone L 45mm x 50mm | Larger corners and thicker panels needing extra reach |
Technical drawing
Specification
| Profile | Equal-leg L (angle) |
| Outside size | 38mm x 38mm |
| Wall thickness | 6.3mm |
| Material | Silicone rubber |
| Hardness | 70° Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Measure every edge you want to cover and add them together, then allow about 5% for trimming and mitred corners. Example: a machine guard with four 1.2m vertical corners and two 1.5m top edges needs 4 x 1.2 + 2 x 1.5 = 7.8m; with 5% allowance that is about 8.2m, so one 10m coil covers it. For runs above 10m the 25m coil is the better value per metre.
Fitting tips
- Clean and degrease the edge first; silicone bonds best to a dry, dust-free surface.
- Cut with a sharp knife against a straight edge for a square end, or mitre at 45° for neat outside corners.
- For a permanent fit, run a bead of silicone adhesive sealant along the inside of both legs.
- At internal corners, cut a V-notch out of one leg so the profile folds without bunching.
- Leave the coil to relax at room temperature before fitting so it lies straight.
Complete your project
- Silicone L Profile – 30mm x 30mm, Uniform 6mm Wall
- Silicone L Profile – 45mm x 50mm
- Silicone U Channel – 18mm x 22mm for 12mm Panels
Questions
What size edge does the 38mm x 38mm L profile fit?
Each leg is 38mm long with a 6.3mm wall, so it covers a square corner with roughly 31mm of each face protected. It suits panel corners, frames and box sections of any thickness, because it sits on the outside of the corner rather than gripping the edge.
Is this rubber angle trim food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, so it can be used on equipment in food and drink production.
Can I use it outdoors?
Yes. Silicone resists UV, ozone and weathering, and stays flexible from -50°C up to +180°C.
How do I fix the corner protector in place?
It can be pushed into position and held with silicone adhesive sealant along both inside faces. Clean the surface first for the strongest bond.
Can I order other colours or lengths?
This listing offers seven colours in 10m or 25m coils. For other quantities please contact us.
Need help choosing a size or colour? Contact our team with your edge thickness and application and we will recommend the right profile.
Product details
| SKU | IP-SILP-38X38-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 38mm x 38mm – 10m or 25m Coil