Rubber & FoamRubberSKU IP-SIUC-18X22-10M
Silicone U Channel – 18mm x 22mm for 12mm Panels – 10m or 30m Coil
Price shown updates with the option you pick.
This black silicone U channel 18mm x 22mm is a push-fit edge protector for 12mm thick panels, glass and sheet edges, sold as a continuous 10m or 30m coil. Made from platinum-cured, food-contact silicone, it cushions sharp or chipped edges on machine guards, enclosures and glazing and stays flexible from -40°C to 200°C.
At a glance
- Silicone U channel edge trim: 18mm wide x 22mm high outside
- 12mm slot to suit 12mm panels, board and glass
- 3mm wall, 60° Shore A for a firm push-fit grip
- Platinum-cured silicone, approved for food contact
- Service temperature -40°C to 200°C; resists heat, UV and weathering
- Black, supplied in 10m or 30m coils
Typical uses
- Edge protector for 12mm polycarbonate, acrylic or composite machine guards
- Rubber edge trim on glass and sheet edges in food and drink plants
- Finishing vending machine, counter and furniture edges
- Protecting doors, stair edges and running boards from knocks
- Covering cut edges to protect staff from sharp material
Which one do I need?
| Panel or edge thickness | Profile to choose |
| 10mm | Silicone U channel 15mm x 20mm |
| 12mm | This silicone U channel 18mm x 22mm |
| Thicker panels and glass (about 18mm) | Silicone round U channel 26.5mm x 25.1mm |
| Up to 30m of edge | One 30m coil |
| Up to 10m of edge | One 10m coil |
Technical drawing
Specification
| Product | Silicone U channel edge trim |
| Outside size | 18mm wide x 22mm high |
| Slot width | 12mm |
| Wall thickness | 3mm |
| Material | Platinum-cured silicone |
| Hardness | 60° Shore A |
| Colour | Black |
| Temperature range | -40°C to 200°C |
| Food contact | Approved |
| Unit of sale | One continuous coil, 10m or 30m |
How much do I need?
Add up every edge you want to cover. Example: a machine guard with six 1200mm x 800mm panels, trimmed all round, needs 6 x 4.0m = 24m of channel. One 30m coil covers it with 6m spare for offcuts and corners. For a single door or panel, a 10m coil is usually enough.
Fitting tips
- Check the panel really is 12mm: a thinner panel will let the channel slide, a thicker one will split the legs.
- Clean the edge so it is free of dust and grease before fitting.
- Start at one end and press the channel on with your thumbs, working along the edge; tap home with a soft mallet if needed.
- Cut square with a sharp knife or shears; on corners, cut a small V notch in the legs so the channel bends without bunching.
- For a permanent fix, run a thin bead of silicone sealant inside the slot before fitting.
Complete your project
- Silicone U channel 15mm x 20mm for 10mm panels
- Silicone round U channel 26.5mm x 25.1mm
- Silicone round U channel 16mm x 25mm
Questions
What panel thickness does this silicone U channel fit?
It is made for 12mm panels, glass and board. For 10mm panels choose the 15mm x 20mm channel.
Is this edge trim suitable for food areas?
Yes. It is made from platinum-cured silicone approved for food contact, so it suits guards and equipment in food and drink plants.
Can it be used outdoors or near heat?
Yes. Silicone resists UV and weathering and stays flexible from -40°C to 200°C.
Will it go round corners?
At 60° Shore A it follows gentle curves. For tight 90° corners, notch the legs or mitre two lengths.
How is it sold?
As one continuous black coil of 10m or 30m, so long edges can be covered without joins.
Need help choosing the right edge protector? Contact our team for advice.
Product details
| SKU | IP-SIUC-18X22-10M |
|---|---|
| Material | Rubber |
| Form | Profile |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone U Channel – 18mm x 22mm for 12mm Panels – 10m or 30m Coil