Rubber & FoamSKU IP-SILP-54X17-BLACK-10
Silicone L Profile – 54mm x 17mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 54mm x 17mm is a wide, unequal-leg angle with a solid 6mm wall: the 54mm face covers a broad edge or kick strip while the 17mm leg hooks round the corner to locate it. It is sold as a single coil of 10m or 25m, in seven colours.
At a glance
- Unequal L profile: 54mm leg x 17mm leg, 6mm thick throughout
- Wide face gives broad impact and wear protection on corners and edges
- 60° Shore A silicone, FDA compliant and WRAS approved
- Works continuously from -50°C to +180°C
- Strong resistance to UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow
- Supplied as a 10m or 25m coil
Typical uses
- Corner and edge guard on stainless cabinets, machine frames and enclosures
- Wide edge protection for glass and sheet metal panels
- Sealing strip on doors, hatches and HVAC housings
- Hygienic corner trim in food, drink and pharmaceutical plants
- Edge finishing in cleanrooms and laboratories
- Potable water equipment where a WRAS approved material is required
Which one do I need?
| Profile | Legs | Best for |
|---|---|---|
| 46mm x 20mm | Unequal | Slightly narrower face with a deeper return leg |
| 54mm x 17mm (this item) | Unequal, 6mm wall | Widest face with a short locating lip |
| 51mm x 26mm | Unequal, 6.3mm wall | Wide face where a longer return leg is needed |
| 55mm x 30mm | Unequal | Heavy-duty corners with a deep return |
| 49mm x 45mm | Near-equal | Wrapping both faces of a square corner |
Technical drawing
Specification
| Profile | Unequal L, 54mm x 17mm |
| Wall thickness | 6mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Compression set (22 h at 175°C) | 31% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Measure every corner or edge to be covered and add about 5% for trimming. Example: the four vertical corners and top front edge of a 1.8m tall, 1m wide cabinet need 4 x 1.8 + 1 = 8.2m, plus 5% = about 8.6m, so a 10m coil covers it; two cabinets need a 25m coil.
Fitting tips
- Clean and degrease the surface so the profile sits flat along its full 54mm face.
- Locate the 17mm leg against the corner first, then press the wide face down progressively.
- Cut with a sharp blade; mitre the ends at 45° where two runs meet at a corner.
- For a permanent or watertight fit, bond it with a silicone or polyurethane adhesive suitable for silicone rubber.
Complete your project
- Silicone L Profile – 51mm x 26mm, 6.3mm Wall – 10m or 25m Coil
- Silicone L Profile – 46mm x 20mm – 10m or 25m Coil
- Silicone L Profile – 55mm x 30mm – 10m or 25m Coil
Questions
What is the difference between the two legs of the 54mm x 17mm L profile?
The 54mm leg is the wide protective face; the 17mm leg is a short return that wraps the corner and holds the strip in line. Both are 6mm thick.
Is this silicone angle trim food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 and is WRAS approved for potable water.
Can it be used outdoors or on hot equipment?
Yes. It resists UV, ozone and weather and stays flexible from -50°C to +180°C.
Does it need adhesive?
An L profile does not grip an edge on its own, so for most fixed installations bond it with a silicone-compatible adhesive or sealant.
Do all colours cost the same?
Yes, every colour is the same price for the same coil length.
Need help choosing a profile? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-SILP-54X17-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 54mm x 17mm – 10m or 25m Coil