Rubber & FoamSKU IP-SLPR-63X6-BLACK-10
Silicone L Profile – 63mm x 6mm Food Grade – 10m or 25m Roll
Price shown updates with the option you pick.
This silicone L profile 63mm x 6mm is a wide, low-height angle extrusion: a 63mm flat leg with a 6mm upstand lip along one edge. It caps and cushions wide edges, sills and panel faces where a standard equal-leg angle is too narrow. Sold by the roll in 10m or 25m lengths, in seven colours.
At a glance
- 63mm wide flat leg with a 6mm high lip – a wide silicone angle trim
- 60° Shore A silicone, flexible enough to follow gentle curves
- FDA 21 CFR 177.2600 and EC 1935/2004 food-contact compliant; WRAS approved material
- Working range -50°C to +180°C with good UV, ozone and weather resistance
- Black, blue, green, red, translucent, white or yellow for colour coding
- 10m or 25m roll
Typical uses
- Wide edge capping on cabinet tops, worktops and machine guards
- Protective lining on sills, ledges and conveyor side plates
- Splash lips and drip edges on food processing equipment
- Colour-coded edge marking in hygiene zones and cleanrooms
Which one do I need?
| Profile | Shape | Best for |
|---|---|---|
| 63mm x 6mm (this item) | Very wide flat leg, low lip | Capping wide edges and sills with a slim, low upstand |
| 54mm x 17mm | Wide leg, taller lip | Wide edges that need a deeper down-stand over the front face |
| 20mm x 13mm | Small unequal angle | Sheet and panel edges up to about 13mm |
Technical drawing
Specification
| Material | Silicone rubber |
| Profile | L (angle), 63mm wide x 6mm high |
| Hardness | 60° Shore A |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One roll, 10m or 25m |
| Operating temperature | -50°C to +180°C |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Compression set | 31% (22 hours at 175°C) |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved material |
How much do I need?
Measure every edge you want to cap and add 5% for trimming and mitres. Example: capping the front and two side edges of a 1200mm x 600mm bench needs 1200 + 600 + 600 = 2,400mm, so about 2.5m. A 10m roll covers four such benches; for ten or more, the 25m roll is better value per metre.
Fitting tips
- Cut with a sharp knife against a straight edge; mitre the corners at 45° for a neat finish.
- Clean and degrease the surface first; bond with a silicone or polyurethane adhesive where the trim must not move.
- Lay the profile without stretching it, or it will shrink back and open gaps at the ends.
- Seat the lip tight against the edge before pressing the flat leg down along its length.
Complete your project
- Silicone L Profile – 54mm x 17mm – 10m or 25m Coil
- Silicone L Profile – 20mm x 13mm Food Grade – 10m or 25m Roll
- Silicone L Profile – 14mm x 10mm – 25m Coil
Questions
Is this silicone angle trim food safe?
Yes. The silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, and the material is WRAS approved for potable water use.
Which way round does the 63mm x 6mm L profile fit?
The 63mm leg lies flat on the top or face you are protecting and the 6mm lip turns down over, or up against, the edge.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
Do all colours cost the same?
Yes, every colour is the same price for each roll length.
Need a different size or colour? Contact our team and we will help you choose.
Product details
| SKU | IP-SLPR-63X6-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 63mm x 6mm Food Grade – 10m or 25m Roll