Rubber & FoamSKU IP-SILP-5X3-BLACK
Silicone L Profile – 5mm x 3mm, Soft 40 Shore A – 25m Coil
A small, soft silicone angle profile that covers a 90° outside corner with a 5 mm flange and a 3 mm leg. Use it to take the sharp edge off sheet metal, glass and panels, to cap an enclosure lid or to seal a narrow corner joint. It is extruded in 40 Shore A silicone, which stays flexible from −50 °C to +180 °C. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and is WRAS approved for drinking water. It is held in stock in seven colours on a continuous 25 m coil (£27.00 per metre inc VAT).
At a glance
- Section: 5.0 mm wide × 3.0 mm high L (angle) profile
- Walls: 2.0 mm thick upright, 1.0 mm thick base flange
- Covers: 3.0 mm of the top face and 2.0 mm of the side face of a square corner
- Material: solid silicone rubber, 40 Shore A (soft)
- Temperature: −50 °C to +180 °C continuous working range
- Compliance: FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved material
- Colours: black, blue, green, red, translucent, white and yellow
- Supplied as: one continuous 25 m coil, about 10 g per metre
Technical drawing
![]()
Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile type | L section (angle / corner protector) | – |
| Overall width | 5.0 mm | Nominal, manufacturer drawing |
| Overall height | 3.0 mm | Nominal, manufacturer drawing |
| Upright (vertical leg) thickness | 2.0 mm | Nominal, manufacturer drawing |
| Base (flange) thickness | 1.0 mm | Nominal, manufacturer drawing |
| Inside contact faces | 3.0 mm flange × 2.0 mm upright | Calculated from the nominal dimensions |
| Dimensional tolerance | Class E2 | ISO 3302-1:2014 |
| Coil length | 25 m continuous | – |
| Approx. weight | ≈ 10 g/m (≈ 0.25 kg per coil) | Calculated from the 9 mm² section and the density |
| Compound | Silicone rubber | – |
| Colours | Black, blue, green, red, translucent, white, yellow | – |
| Hardness | 40 ° Shore A | DIN ISO 48-4 |
| Density | 1.12 g/cm³ | DIN EN ISO 1183-1 method A |
| Tensile strength | 9.6 N/mm² (9.6 MPa) | ISO 37, type 1 dumbbell |
| Elongation at break | 770 % | ISO 37, type 1 dumbbell |
| Tear strength | 28 N/mm (28 kN/m) | ASTM D624, die B |
| Compression set | 36 % after 22 h at 175 °C | DIN ISO 815-1, type B, method A |
| Rebound resilience | 56 % | ISO 4662 |
| Working temperature | −50 °C to +180 °C | Manufacturer rating |
| Environmental resistance | Ozone, UV, oxidation, weathering, cosmic and ionising radiation, corona discharge | Manufacturer rating |
Materials and compliance
The profile is extruded from a silicone rubber compound. The manufacturer's technical data states for this product:
- FDA 21 CFR 177.2600: the compound complies with the US regulation for rubber articles intended for repeated food contact.
- EC 1935/2004: the compound meets the EU framework regulation for materials in contact with food.
- WRAS approved material: suitable for use in contact with drinking (wholesome) water in UK installations.
- Free from TSE/BSE by-products (no animal-derived ingredients).
- Free from phthalates.
Compliance applies to the compound. You remain responsible for checking that your finished application meets the rules for your use. Contact us if you need supporting paperwork for an audit.
Where it is used
- Edge protection: takes the sharp edge off sheet metal, glass, acrylic and panels, and protects the edge from knocks.
- Enclosures and machine guards: caps a lid or panel corner and helps keep dust and splashes out of a narrow corner joint.
- Food and beverage plant: a corner trim made from FDA and EC 1935/2004 compliant material, available in blue or white for visibility.
- Water systems: WRAS approved material for fittings and housings in potable water installations.
- Ovens, HVAC and hot equipment: stays flexible up to +180 °C, where PVC and EPDM trims would harden or soften.
- Labs, cleanrooms and display work: gives a neat, easy-clean finish. The seven colours suit colour-coding.
- Transport and leisure: trim and corner sealing on caravans, motorhomes, classic vehicles and rail interiors.
![]()
Fitting
- Clean the edge and dry it. Remove oil, release agent and swarf.
- Seat the inside corner of the L onto the corner of the panel. The 5 mm flange lies on one face and the 3 mm leg on the other.
- Press it along the edge without stretching it. Stretched silicone shrinks back and leaves gaps at the ends.
- For a permanent or watertight fit, bed it in a compatible silicone or polyurethane sealant. Many protective uses need no adhesive.
- Cut the ends square with a sharp knife or blade.
How much do I need?
Each coil is 25 m. Add up the edge lengths in metres, allow about 5 % for trimming, and divide by 25. For example, 40 m of edges plus 5 % is 42 m, which takes 2 coils with 8 m to spare.
Frequently asked questions
What size of corner does it fit?
It fits a square (90°) outside corner. The inside of the L covers 3 mm of one face and 2 mm of the adjoining face. Overall, the profile is 5 mm wide and 3 mm high.
Can it be pushed onto the edge of a thin sheet like an edge trim?
No. An L profile is open on one side, so it covers a corner rather than clamping onto a sheet edge. To grip the edge of a panel, use a U channel sized to the panel thickness, or bond this L in place.
How do I cut and join it?
Cut it with a sharp knife or blade. For corners, mitre the ends at 45°, or butt them together. A dab of silicone sealant joins and seals the ends.
Will it stay put without glue?
On many edges, the soft 40 Shore A silicone sits snugly enough for light protective use. Where it will be knocked, washed down or must keep water out, bond it with a silicone or polyurethane sealant. Silicone needs a compatible adhesive, so check that before you choose one.
Is it safe for food contact and drinking water?
Yes. The compound complies with FDA 21 CFR 177.2600 and EC 1935/2004, and it is WRAS approved for drinking water. It is also free from phthalates and from TSE/BSE by-products.
What temperatures can it take?
Its continuous working range is −50 °C to +180 °C. It stays flexible in a freezer and does not harden near ovens or hot ducts. Compression set is 36 % after 22 hours at 175 °C.
Is it suitable outdoors?
Yes. Silicone resists UV, ozone and weathering, so it will not crack or chalk like many PVC trims.
Which colour should I choose?
All seven colours have the same specification. Black and translucent are the least visible. Blue is common in food plants because it shows up easily. Red, yellow and green suit colour-coding or warning edges.
Can I buy a shorter length?
This listing is for a full 25 m coil. For other lengths or quantities, please contact our team.
Data sheet
Download the technical data sheet (PDF)
Related profiles
- Silicone L Profile 4.5mm x 5.2mm, 25m coil
- Silicone L Profile 10mm x 10mm, 25m coil
- Silicone L Profile 16mm x 10mm, 25m coil
Questions about fit or quantity? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SILP-5X3-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 5mm x 3mm, Soft 40 Shore A – 25m Coil