Rubber & FoamRubberSKU IP-SIRU-15X40-10M-BLACK
Silicone Round U Channel – 15mm x 40mm – 10m or 25m Roll
Price shown updates with the option you pick.
This silicone round U channel 15mm x 40mm is a tall push-on edge trim with a 6mm slot, made to cover and cushion the edges of 6mm panels, sheet and glass. It is sold by the roll in 10m or 25m lengths and in seven colours, ready to cut to length on site.
At a glance
- Profile 15mm wide x 40mm high with a 6mm slot
- Solid 4.5mm walls each side for a firm grip and good impact cushioning
- 60° Shore A silicone, FDA compliant and WRAS approved
- Works continuously from -50°C to +180°C
- Strong resistance to UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow
- Supplied as a 10m or 25m roll
Typical uses
- Edge protection for 6mm polycarbonate, acrylic and glass guards on machinery
- Glazing channel for panes held in aluminium or steel frames
- Weather and draught seal around hatches, doors and enclosure panels
- Vibration damping between clamped or mating panels
- Colour-coded edge trim on food processing equipment
- Edge trim in potable water installations
Which one do I need?
| Profile | Slot | Best for |
|---|---|---|
| 13mm x 40mm | 3mm | 3mm sheet metal panels and guards |
| 15mm x 40mm (this item) | 6mm | 6mm polycarbonate, acrylic, glass and board edges |
| 15mm x 40mm, 8mm slot | 8mm | 8mm sheet and thicker glazing |
| 15mm x 28.5mm | 3mm | 3mm panels where a shorter profile fits better |
Technical drawing
Specification
| Profile | Round U channel, 15mm wide x 40mm high |
| Slot width | 6mm |
| Wall thickness | 4.5mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA compliant, WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One roll, 10m or 25m |
How much do I need?
Add up the length of every edge to be covered and allow about 5% for trimming. Example: four guard panels of 1m x 0.6m edged all round need 4 x 3.2m = 12.8m, plus 5% = about 13.5m, so one 25m roll covers the job with plenty spare; a 10m roll suits runs up to about 9.5m.
Fitting tips
- Check the panel is close to 6mm thick; much thinner edges will not be gripped firmly.
- Clean and degrease the edge so the silicone seats fully.
- Press the channel on progressively from one end instead of stretching it, or it may shrink back at the ends.
- Cut with a sharp blade and butt the ends tightly; a dab of silicone sealant closes the joint.
- For a permanent or watertight fit, run sealant inside the slot before fitting.
Complete your project
- Silicone Round U Channel – 13mm x 40mm – 10m or 25m Roll
- Silicone Round U Channel – 15mm x 40mm – 8mm Slot – 10m or 25m Coil
- Silicone Round U Channel – 15mm x 28.5mm – 10m or 25m Coil
Questions
What thickness of panel does the 15mm x 40mm channel fit?
The 6mm slot suits 6mm sheet, glass and board. For 8mm material choose the 8mm slot version of this profile; for 3mm metal panels choose the 13mm x 40mm channel.
Is this silicone edge trim food safe?
Yes. The silicone is FDA compliant and WRAS approved, so it can be used on food equipment and in potable water applications.
Can it be used outdoors or near heat?
Yes. It resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
How do I fix it permanently?
It push-fits for most jobs. For a permanent or watertight result, apply a compatible silicone adhesive or sealant inside the slot first.
Do all colours cost the same?
Yes, every colour is the same price for the same roll length.
Need help choosing a profile? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-SIRU-15X40-10M-BLACK |
|---|---|
| Material | Rubber |
| Form | Profile |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Round U Channel – 15mm x 40mm – 10m or 25m Roll