Rubber & FoamSKU IP-SRUC-26.5X25.1-BLACK-10
Silicone Round U Channel – 26.5mm x 25.1mm – 10m or 25m Roll
Price shown updates with the option you pick.
This silicone round U channel 26.5mm x 25.1mm is a large, thick-walled edge trim with an 18.6mm wide internal channel, made to cap and cushion thick panels, glass and fabricated edges. It is sold per roll, in a 10m or 25m length, in seven colours.
At a glance
- 26.5mm wide x 25.1mm high, 3mm wall
- Internal channel 18.6mm wide and 22.1mm deep
- 70 Shore A silicone, flexible and resilient
- Works from -50°C to +180°C
- Material is FDA compliant and WRAS approved
- Resists UV, ozone and weathering; seven colours
Typical uses
- Capping the top edge of thick glass or polycarbonate machine guards
- Protecting edges of fabricated stainless panels in food plants
- Cushioning panels held in frames to cut vibration and rattle
- Edge sealing on hatches, enclosures and access panels
- Colour-coded edging in hygiene zones and potable water installations
Which one do I need?
| Profile | Best for |
|---|---|
| 26.5mm x 25.1mm (this product) | Thick edges up to about 18mm, where a deep, robust cap is wanted |
| 20.5mm x 20.2mm | Medium panels where a smaller cap is enough |
| 16mm x 25mm | Thinner panels needing a deep, narrow channel |
| 13mm x 25mm | Narrow edges with long side cover |
Technical drawing
Specification
| Width | 26.5mm |
| Height | 25.1mm |
| Channel width | 18.6mm |
| Channel depth | 22.1mm |
| Wall thickness | 3mm |
| Hardness | 70° Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Tear strength | 31 N/mm |
| Temperature range | -50°C to +180°C |
| Approvals | FDA compliant, WRAS approved |
| Unit of sale | One roll, 10m or 25m |
How much do I need?
Measure every edge to be capped and add about 5% for trimming. Three guard panels with 2.4m of top edge each need 7.2m, so a 10m roll covers them with spare; a full line of eight similar guards (about 19m) suits the 25m roll.
Fitting tips
- Check the panel thickness first: the channel is 18.6mm wide, so very thin sheet will sit loose without adhesive
- Clean and degrease the edge so the silicone grips evenly
- Push the channel on from one end and work along, rather than stretching it into place
- For a permanent fit, run a bead of silicone sealant inside the channel before fitting
Complete your project
- Silicone Round U Channel – 20.5mm x 20.2mm Profile – Roll
- Silicone Round U Channel – 16mm x 25mm – 10m or 25m Roll
- Silicone Round U Channel – 15mm x 40mm – 8mm Slot – 10m or 25m Coil
Questions
What panel thickness does this edge trim fit?
The internal channel is 18.6mm wide, so it suits thick glass, polycarbonate or fabricated edges close to that size. Thinner panels can be fitted with a silicone sealant inside the channel.
Can it be used in food areas?
Yes. The silicone is FDA compliant, so it suits food processing and handling equipment.
Is it suitable for drinking water systems?
The material is WRAS approved for use with potable water.
Will it cope with heat and outdoor use?
It works from -50°C to +180°C and resists UV, ozone and weathering.
Not sure which size suits your edge? Contact our team with the panel thickness and we will help you choose.
Product details
| SKU | IP-SRUC-26.5X25.1-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Round U Channel – 26.5mm x 25.1mm – 10m or 25m Roll