Rubber & FoamSKU IP-SIRU-4X9.5-25-BLACK
Silicone Round U Channel – 4mm x 9.5mm for 1mm Edges – 25m Coil
A silicone U channel 4mm across and 9.5mm tall with an unusually deep slot: 1mm wide and 7.5mm deep. It is made for 1mm sheet steel, stainless, aluminium, glass, acrylic and polycarbonate where a shallow micro channel would pull off. The deep slot grips a lot more of the edge, the 1.5mm side walls hold firmly at 70 Shore A, and the 2mm solid base with a fully rounded bottom gives a neat, durable bumper. The compound is approved for food contact and drinking water (see Material compliance). Supplied as one continuous 25m coil in seven colours, all held in stock.
At a glance
- Fits edges about 1mm thick (roughly 0.8 to 1.2mm)
- 4mm wide x 9.5mm high, 1mm slot, 7.5mm slot depth, 1.5mm walls, 2mm solid rounded base
- Silicone rubber, 70 Shore A: firmer grip than softer micro trims, still bends round curves
- Continuous service from -50°C to +180°C
- FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved compound
- Unaffected by UV, ozone and weather, so it will not crack or harden outdoors
- Black, blue, green, red, translucent, white or yellow, all at the same price
- 25m coil, about £27.00 per metre inc VAT
Technical drawing
![]()
Typical uses
- Capping the 1mm edges of stainless guards, splash screens and hopper rims on food and bakery lines
- Edging sheet-metal cut-outs and mounting plates in control panels so cable insulation cannot chafe
- Cushioning 1mm glass or polycarbonate in instrument windows, cabinet doors and display cases
- Edge trim on lids, hatches and covers that are in contact with drinking water
- Protecting edges on ovens, heaters, dryers and lighting where PVC or EPDM trims would degrade
- Colour-coding guards, trays and fixtures by line, zone or allergen
Which size do I need?
Measure the edge thickness and choose the slot that matches it most closely. For the same edge, a deeper slot holds more securely.
| Silicone U channel | Slot width x depth | Hardness |
|---|---|---|
| Silicone Round U Channel 3mm x 5mm | 1mm x 4mm | 60 Shore A |
| Silicone Round U Channel 4mm x 9.5mm (this one) | 1mm x 7.5mm | 70 Shore A |
| Silicone Round U Channel 3.2mm x 7.8mm | 1.2mm x 5mm | 60 Shore A |
| Silicone U Channel 7.1mm x 13mm | 4mm | – |
Specification
| Property | Value | Test method |
|---|---|---|
| Profile and dimensions | ||
| Profile | Round-bottom U channel (push-on edge trim) | – |
| Overall width | 4.0 mm | – |
| Overall height | 9.5 mm | – |
| Slot (grip) width | 1.0 mm | – |
| Slot depth | 7.5 mm | – |
| Wall thickness | 1.5 mm each side | – |
| Base | 2.0 mm solid, full-round bottom (R2.0) | – |
| Fits panel / edge | 1.0 mm nominal | – |
| Dimensional tolerance | Class E2 | ISO 3302-1:2014 |
| Weight (calculated) | approx. 34 g per metre, approx. 0.85 kg per 25 m coil | From cross-section and density |
| Material properties (typical) | ||
| Material | Silicone rubber (VMQ) | – |
| Hardness | 70 Shore A | DIN ISO 48-4 |
| Density | 1.18 g/cm³ | DIN EN ISO 1183-1 A |
| Tensile strength | 11.3 N/mm² (11.3 MPa) | ISO 37 Type 1 |
| Elongation at break | 530 % | ISO 37 Type 1 |
| Tear strength | 31 N/mm (31 kN/m) | ASTM D624 B |
| Compression set | 40 % after 22 h at 175 °C | DIN ISO 815-1 Type B, Method A |
| Rebound resilience | 55 % | ISO 4662 |
| Operating temperature | -50 °C to +180 °C continuous | – |
| Environmental resistance | Ozone, UV, oxidation, weathering, cosmic and ionising radiation, corona discharge | – |
| Supply | ||
| Colours | Black, blue, green, red, translucent, white, yellow | – |
| Unit of sale | One continuous 25 m coil | – |
Material compliance
The manufacturer's datasheet for this exact profile states that its silicone compound meets:
- FDA 21 CFR 177.2600: the US regulation for rubber articles in repeated contact with food
- EC 1935/2004: the EU and UK framework regulation for food-contact materials
- WRAS approved: approved for contact with drinking (potable) water in the UK
- Free from TSE/BSE by-products: no animal-derived ingredients of TSE/BSE concern
- Phthalate-free: contains no phthalate plasticisers
These approvals apply to the material. Whether a finished assembly complies depends on its design and use. Compliance documents are available on request: contact our team.
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming and joints. Example: a hopper with a 500 x 400mm rim has a 1.8m perimeter; ten of them need 18m, or about 19m with allowance. One 25m coil covers the job with spare.
Fitting tips
- Deburr the edge and wipe off oil and dust before fitting
- Start at one end and press the channel on with your thumb, working along the edge; a little soapy water helps on long runs
- Cut slightly over length with a sharp knife and push the ends together for a tight butt joint
- On edges under 1mm, or where it must be sealed or permanent, run a bead of silicone or polyurethane sealant into the slot first
Questions
What edge thickness will it fit?
The slot is 1mm wide and 7.5mm deep. It suits 1mm edges and, because silicone stretches a little, usually holds on edges from about 0.8mm to 1.2mm. On thinner edges add a little silicone sealant so it cannot slide off.
How is it different from the 3mm x 5mm channel?
Both take a 1mm edge, but this profile's slot is 7.5mm deep instead of 4mm, the walls are 1.5mm instead of 1mm, and the compound is firmer at 70 Shore A. It grips much more securely and stands up better to knocks; choose the 3mm x 5mm where space is tight.
Is it suitable for food equipment?
Yes. The compound is stated to meet FDA 21 CFR 177.2600 and EC 1935/2004, so it suits guards, hoppers and panels on food processing, packaging and catering equipment.
Can it be used with drinking water?
Yes. The material is WRAS approved for contact with potable water.
Is it suitable for hot equipment or outdoor use?
Yes. It is rated for continuous use from -50°C to +180°C and resists UV, ozone and weathering.
Will it go round corners?
Yes, it follows gentle curves easily. On a sharp 90° corner, cut a small V notch in the base so it folds neatly, or butt two mitred lengths together.
How do I cut and join it?
Cut with a sharp knife or scissors. For a neat finish push the ends tightly together; for a sealed or permanent joint bond them with a silicone adhesive sealant.
How accurate are the dimensions?
It is extruded to ISO 3302-1 tolerance class E2, the standard precision class for rubber extrusions, so allow a few tenths of a millimetre either way on the nominal sizes.
Is it in stock?
Yes. All seven colours are held in stock, so orders go out quickly, as shown by the dispatch message above.
Can I order a shorter length or a bulk quantity?
This listing is a full 25m coil. For cut lengths or multiple coils, ask our team for a quote.
Are all colours the same price?
Yes. Every colour is the same profile, the same compound and the same price.
Need help choosing an edge trim or seal? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-SIRU-4X9.5-25-BLACK |
|---|---|
| Weight | 1.87 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Round U Channel – 4mm x 9.5mm for 1mm Edges – 25m Coil