Rubber & FoamSKU IP-SSET-8.9X12.4-5M
Silicone Self-Grip Edge Trim 8.9 x 12.4mm – Fits 1–4mm Panels – Blue, Stainless Wire Insert – 5m, 10m or 25m Roll
Price shown updates with the option you pick.
A blue, push-on silicone edge trim for sheet edges 1 mm to 4 mm thick. The 8.9 mm × 12.4 mm silicone body is moulded around a stainless steel spring-wire inlay that keeps the U clamped shut, and three angled fins inside the channel bite on both faces of the panel, so it stays put without glue and can be pulled off and refitted. The silicone is made from FDA-listed ingredients, works from -60 °C to +200 °C and is rated UL94-HB, which makes it a natural choice for food plant guarding, ovens and hot enclosures where PVC or EPDM edge trim would harden, soften or fail an audit.
At a glance
- Size: 8.9 mm wide × 12.4 mm high, 3.8 mm mouth
- Fits: panel, sheet or glass edges 1 mm to 4 mm thick
- Grip: stainless steel wire inlay plus three internal fins: no adhesive, removable
- Material: 70 ±5 Shore A silicone, FDA-listed ingredients (21 CFR 177.2600)
- Temperature: -60 °C to +200 °C working range
- Flammability: UL94-HB
- Colour: blue (RAL 5002): easy to spot on stainless and in food areas
- Rolls: 5 m (£50.40/m), 10 m (£45.36/m) or 25 m (£38.34/m), prices inc VAT
Technical drawing
![]()
Nominal dimensions in mm. The drawing is also in the image gallery for download.
Specifications
| Property | Value | Test method / source |
|---|---|---|
| Profile | Self-grip U edge trim with internal fins | - |
| Overall width | 8.9 mm | Nominal, manufacturer drawing |
| Overall height | 12.4 mm | Nominal, manufacturer drawing |
| Mouth opening | 3.8 mm | Nominal, manufacturer drawing |
| Panel thickness it fits | 1 mm to 4 mm | Manufacturer data |
| Gripping fins | 3 (two on one side, one opposite) | Manufacturer drawing |
| Carrier | Stainless steel spring-wire inlay | Manufacturer data |
| Body material | Silicone rubber (VMQ) | - |
| Hardness | 70 ±5 Shore A | DIN 53505 |
| Density | approx. 1.18 g/cm³ | ISO 1183 |
| Tensile strength | 10.7 MPa (minimum) | ISO 37 |
| Elongation at break | 400 % (minimum) | ISO 37 |
| Tear resistance | 22 N/mm | ASTM D624 (die B) |
| Compression set | 40 % after 22 h at 175 °C | DIN ISO 815 |
| Dielectric strength | 20 kV/mm | VDE 0303 |
| Working temperature | -60 °C to +200 °C | Manufacturer data |
| Flammability | UL94-HB | UL 94 (manufacturer stated) |
| Colour | Blue, RAL 5002 | - |
| Dimensional tolerance | Not stated by the manufacturer: ask us if your fit is critical | - |
| Roll lengths | 5 m, 10 m, 25 m (continuous lengths) | - |
Materials and compliance
- Food contact (FDA): the manufacturer states the silicone compound is FDA compliant, made from FDA-listed ingredients to 21 CFR 177.2600 (rubber articles intended for repeated use).
- Flammability: stated as flame retardant to UL94-HB.
- Chemical resistance (manufacturer data): excellent against water, water-glycol mixtures, salt spray and common detergents and degreasers; good against fuels and lubricants.
- Quality system: the manufacturer's datasheet states ISO 9001:2015 registration.
No EC 1935/2004, WRAS, REACH or RoHS declaration is stated for this profile, so we do not claim them. If your audit needs a specific certificate, contact us before ordering and we will request it.
Which roll length?
| Roll | Price inc VAT | Per metre | Good for |
|---|---|---|---|
| 5 m | £252.00 | £50.40 | One guard, door or repair |
| 10 m | £453.60 | £45.36 | A small machine or several panels |
| 25 m | £958.50 | £38.34 | Production lines, batches or stock (saves 24 % per metre vs 5 m) |
How much do I need? Add up every edge you want to cover and allow about 5 % for cuts. Example: three 600 × 400 mm guard panels trimmed on all four edges = 3 × 2.0 m = 6.0 m, plus 5 % ≈ 6.3 m, so order a 10 m roll.
Typical uses
- Stainless machine guards and covers in food, dairy and bakery plants
- Oven, dryer and hot-enclosure panel edges up to 200 °C
- Cut sheet metal and fibreglass edges on cabinets and enclosures
- Marine hatches, lockers and equipment panels
- Playground equipment and tool trays where sharp edges are a hazard
- Glass and acrylic sheet edges within the 1–4 mm range
How it fits
![]()
- Deburr and wipe the edge, and check it is 1 mm to 4 mm thick.
- Start at a corner or mid-run, press the mouth over the edge by hand, then seat it fully with a rubber mallet.
- Work round bends a little at a time; do not stretch the silicone.
- Cut through the wire with side cutters or a fine-tooth hacksaw. Leave 1–2 mm extra so the ends butt tightly.
Questions
What panel thickness does it fit?
Edges from 1 mm to 4 mm thick. The fins fold further on thin sheet and less on thick sheet, so one trim covers the whole range. For thicker panels see the larger silicone U channels below.
Do I need adhesive?
No. The stainless wire inlay holds the U closed and the fins grip both faces. Because there is no glue it can be removed and reused, which suits guards that come off for cleaning.
Can it be used in food production areas?
Yes. The manufacturer states it is made from FDA-listed silicone ingredients (21 CFR 177.2600), and the blue colour makes any stray piece easy to see. If you need an EC 1935/2004 declaration, ask us first: it is not stated for this profile.
What temperatures will it take?
-60 °C to +200 °C continuous working range. It stays flexible in freezers and does not soften on oven or dryer panels the way PVC trim does.
How do I cut and join it?
Cut through the wire inlay with side cutters, aviation snips or a fine hacksaw (a knife will not cut the wire). For a neat joint, butt two square-cut ends tightly together; on a closed loop, start and finish on a straight run rather than a corner.
Will it go round corners?
Yes. The wire carrier lets it follow radiused corners and curves. Work it round gradually; on a sharp 90° corner, cut a small V-notch in the base so it does not bunch.
What chemicals does it resist?
Excellent resistance to water, water-glycol, salt spray and detergents; good resistance to fuels and lubricants. It is not recommended for constant immersion in fuel or strong solvents.
Is it sold by the metre?
It is sold as continuous 5 m, 10 m or 25 m rolls. Need a longer run or a different colour? Contact us for a quote.
Complete your project
- Silicone U Channel 18 × 22 mm for 12 mm panels
- Silicone Round U Channel 13 × 25 mm
- Silicone P Extrusion, food contact grade, 25 × 12 mm
Questions about fit or certificates? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SSET-8.9X12.4-5M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Self-Grip Edge Trim 8.9 x 12.4mm – Fits 1–4mm Panels – Blue, Stainless Wire Insert – 5m, 10m or 25m Roll