Rubber & FoamSKU IP-SILT-12.3X11.4-BLACK
Silicone T Profile – 12.3mm x 11.4mm, Food Grade, 70 Shore A – 25m Roll
This silicone T profile measures 12.3mm across the flange and 11.4mm high, with a sturdy 3.5mm flange and 3.4mm stem that push into slots and tracks to make a firm, flush seal. It is food grade, available in seven colours and sold as one continuous 25m roll.
At a glance
- Silicone T section: 12.3mm flange, 11.4mm overall height
- Thick 3.5mm flange and 3.4mm stem, harder 70 Shore A grade
- Food grade: FDA 21 CFR 177.2600 and EC 1935/2004, plus WRAS approval
- Stays flexible from -50°C to +180°C
- Good resistance to UV, ozone and weathering
- Black, white, translucent, red, green, blue or yellow
Typical uses
- Track and slot seals on food processing and catering equipment
- Seals on brewery and drinking water equipment
- Joint seals on hot enclosures, ovens and HVAC ducting
- Weatherproof joints on hatches and outdoor panels
- Trim seals in vehicle and machinery panel gaps
Which one do I need?
| Silicone T profile | Character | Best for |
|---|---|---|
| 13mm x 6mm | Shallow stem | Shallow slots and low-profile joints |
| 12.3mm x 11.4mm (this item) | Thick flange, firm 70 Shore A | Tracks that see wear or foot and trolley traffic |
| 14mm x 11mm | Wider flange, similar depth | Narrow gaps needing more flange cover |
| 12mm x 15mm | Deepest stem, thin flange | Deep slots where the seal must not pull out |
Technical drawing
Specification
| Material | Silicone, FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved |
| Flange width | 12.3mm |
| Overall height | 11.4mm |
| Flange thickness | 3.5mm |
| Stem thickness | 3.4mm |
| Hardness | 70° Shore A |
| Operating temperature | -50°C to +180°C |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Tear strength | 31 N/mm |
| Compression set (22h at 175°C) | 40% |
| Colours | Black, white, translucent, red, green, blue, yellow |
| Unit of sale | One 25m roll |
How much do I need?
Add up every slot or track you want to seal. Two processing tables with 2.4m x 0.9m tops sealed all round need 2 x 6.6m = 13.2m; add three 3m panel joints (9m) and the total is 22.2m, so one 25m roll is enough with spare for trimming.
Fitting tips
- Clean and dry the slot so the 3.4mm stem can seat fully.
- Press the stem in along the length and run a thumb over the flange so it sits flat.
- Do not stretch the profile as you fit it, or it can shrink back and open the joints.
- For a permanent fix, add a silicone adhesive in the slot before pressing the stem in.
Complete your project
- Silicone T Seal Profile – 12mm x 15mm, Food Grade – 25m Roll
- Silicone T Seal Profile – 14mm x 11mm – 25m Roll
- Silicone T Profile – 13mm x 6mm Food Grade – 25m Roll
Questions
Is this silicone T profile food safe?
Yes. It complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and carries WRAS approval.
How is it different from the 12mm x 15mm T seal?
This profile has a thicker 3.5mm flange and is a firmer 70 Shore A, so it stands up better to wear; the 12mm x 15mm has a thinner flange and a deeper stem.
What slot does the stem fit?
The stem is 3.4mm thick and about 7.9mm deep below the flange, so it suits slots around 3.4mm wide and 8mm deep.
What temperatures can it take?
It stays flexible from -50°C to +180°C.
Can I order a single colour?
Yes. Choose black, white, translucent, red, green, blue or yellow; each 25m roll is one colour.
Need help choosing the right seal? Contact our team.
Product details
| SKU | IP-SILT-12.3X11.4-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Profile – 12.3mm x 11.4mm, Food Grade, 70 Shore A – 25m Roll