Rubber & FoamSKU IP-SIUC-3.2X5X1.2-30-BLACK
Silicone U Channel – 3.2mm x 5mm for 1–1.2mm Panels – 30m Coil
A slim, push-on silicone U channel for finishing and protecting thin edges between 1mm and 1.2mm thick: light-gauge sheet metal, thin glass, acrylic and fibre panels. At only 3.2mm wide and 5mm tall it adds almost nothing to the edge, yet the 4mm-deep slot grips firmly without adhesive on most edges in that range. It is made from platinum-cured silicone, which gives a smooth, glossy surface that will not yellow with age, and the compound is approved for food-contact use. Supplied as one continuous 30m coil in black, translucent or white.
At a glance
- Fits panels and edges 1.0mm to 1.2mm thick
- 3.2mm wide x 5mm high, 1.2mm slot, 4mm slot depth, 1mm walls and base
- Platinum-cured silicone, 60 Shore A: soft, flexible and quick to fit by hand
- Works from -40°C up to +200°C, so it suits ovens, heaters and lighting as well as cold rooms
- Compound approved for food-contact applications
- Glossy, non-yellowing finish; stands up well to weather and outdoor exposure
- Black, translucent or white, all the same price
- 30m coil, about £19.25 per metre
Typical uses
- Capping thin stainless splash panels, guards and dividers on food and catering equipment
- Edging thin glass or acrylic in lab cabinets, display cases and instrument housings
- Protecting cables and hands from raw 1mm sheet-metal cut-outs in enclosures and control panels
- Finishing the edges of vending machine, kiosk and appliance panels
- Edge trim on heater, oven and lamp housings where PVC or ordinary rubber would soften or crack
- Soft bumper strip on thin shelves, trays and stair nosings
Technical drawing
![]()
Which size do I need?
Measure the thickness of the edge you want to cover, then choose the channel whose slot matches it.
| Silicone U channel | Fits edge thickness |
|---|---|
| Silicone Round U Channel 3mm x 5mm | 1mm |
| Silicone U Channel 3.2mm x 5mm (this one) | 1.0 – 1.2mm |
| Silicone U Channel 7.1mm x 13mm | 4mm |
| Silicone U Channel 9.1mm x 14mm | 5mm |
| Silicone U Channel 15mm x 20mm | 10mm |
Specification
| Property | Value | Test method / basis |
|---|---|---|
| Profile and dimensions | ||
| Profile | U channel with rounded base (push-on edge trim) | – |
| Overall width | 3.2 mm | Nominal, from profile drawing |
| Overall height | 5.0 mm | Nominal, from profile drawing |
| Slot (grip) width | 1.2 mm | Nominal, from profile drawing |
| Slot depth | 4.0 mm | Nominal, from profile drawing |
| Wall and base thickness | 1.0 mm | Nominal, from profile drawing |
| Fits panel / edge | 1.0 – 1.2 mm | Manufacturer's fitting range |
| Weight | approx. 12 g per metre, approx. 0.36 kg per 30 m coil | Calculated from section area (about 10 mm²) at typical silicone density |
| Material | ||
| Material | Silicone rubber, platinum cured | Manufacturer's specification |
| Hardness | 60 Shore A | Shore A durometer |
| Minimum service temperature | -40 °C | Manufacturer's rating |
| Maximum service temperature | +200 °C | Manufacturer's rating |
| Weathering resistance | Excellent | Manufacturer's rating |
| Oil resistance | Fair (not for continuous oil or fuel immersion) | Manufacturer's rating |
| Surface finish | Smooth, high gloss, non-yellowing | Visual |
| Supply | ||
| Colours | Black, translucent, white | – |
| Unit of sale | One continuous 30 m coil | – |
Materials and compliance
- Platinum-cured silicone: cured with a platinum catalyst rather than peroxide, which leaves no peroxide by-products, keeps translucent and white grades clear of yellowing and gives the glossy surface.
- Food-contact approved compound: the manufacturer states this compound is approved for food-contact applications, so it is suitable for trims on food processing, catering and packaging equipment.
- Temperature stable: silicone keeps its flexibility from -40°C to +200°C, so it will not go brittle in a freezer or soften next to a heater.
The approval applies to the material. Whether a finished assembly complies depends on how and where it is used. If you need a declaration for an audit, contact our team before ordering and we will confirm what documentation is available for this profile.
How much do I need?
Add up the length of every edge you want to cover and allow about 5% for trimming and joints. Example: twelve 1mm stainless splash panels, each with a 2.2m exposed edge, need 26.4m, or about 27.7m with allowance, so one 30m coil covers the job.
Fitting tips
- Deburr the edge and wipe it clean and dry before fitting
- Start at one end and press the channel on with your thumb, working along the edge
- Cut with a sharp knife or scissors, a little over length, then push the ends together for a neat butt joint
- For a permanent or sealed fit, or on an edge thinner than 1mm, run a thin bead of silicone or polyurethane sealant into the slot first
Questions
What edge thickness does it fit?
It is made for edges 1.0mm to 1.2mm thick. The 1.2mm slot grips a 1.0mm edge firmly and slips over a 1.2mm edge without splitting.
Will it stay on without glue?
On a clean 1.0–1.2mm edge it holds by grip alone for most jobs. Where there is vibration, frequent handling or a thinner edge, bond it with a silicone or polyurethane sealant.
Can it be used on food equipment?
Yes. The manufacturer states the compound is approved for food-contact applications, and the smooth, glossy surface is easy to wipe clean.
How hot can it get?
It is rated from -40°C to +200°C, so it suits oven doors, heater panels and lamp housings as well as chillers and freezers.
Can it go round corners and curves?
Yes. At 60 Shore A and only 3.2mm wide it follows gentle curves easily. For a sharp 90° corner, cut a small V notch in the base or butt two lengths together.
Is it oil resistant?
Only fairly. It copes with occasional splashes, but for parts that sit in oil or fuel choose a nitrile or fluorosilicone profile instead.
What is the difference between translucent and white?
Translucent is a milky, see-through finish that blends into glass and stainless steel. White is opaque and gives a clean, solid edge. Both are the same compound, profile and price.
Can I buy a shorter length?
This listing is a full 30m coil. For cut lengths or larger quantities, ask our team for a quote.
Need help choosing an edge trim or seal? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SIUC-3.2X5X1.2-30-BLACK |
|---|---|
| Weight | 0.88 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone U Channel – 3.2mm x 5mm for 1–1.2mm Panels – 30m Coil