
Rubber & FoamSKU IP-TPEEP-12.5X17-STD
TPE Edge Protector – 12.5mm x 17mm – 25m Roll
This TPE edge protector 12.5mm x 17mm is a black and yellow push-on safety strip that grips thin sheet edges and cushions knocks while warning people of the hazard. It is sold as one continuous 25m roll.
At a glance
- TPE edge protector 12.5mm wide x 17mm high
- High-visibility black and yellow hazard edge guard
- Hollow bulb over a gripping slot with internal fins
- Push-on safety edging, no adhesive needed
- Resists UV, weather, water and dilute acids and bases
- Works from -30°C to +80°C
Typical uses
- Racking and shelving edge protection in warehouses
- Covering sharp sheet-metal edges on machinery guards
- Hazard marking on low doorways, hatches and panels
- Protecting glass or panel edges during handling
- General workplace safety edging indoors and out
Which one do I need?
| Size | Best for |
| 12.5mm x 17mm, 25m roll (this one) | Long runs on thin sheet edges, racking and guards |
| 33mm x 45mm, 10 x 1m lengths | Bigger impact zones such as beams, columns and thick panels |
Technical drawing
Specification
| Material | Bi-material thermoplastic elastomer (TPE) |
| Size | 12.5mm wide x 17mm high |
| Grip section | 9.5mm high, 6mm wide at the base |
| Colour | Black and yellow |
| Hardness | 42° / 90° Shore A (soft bulb / firm grip) |
| Operating temperature | -30°C to +80°C |
| Weight | 0.11kg per metre |
| Tolerance class | ISO 3302-1 E2 - L2 |
| Fixing | Push-fit, no adhesive |
| Unit of sale | One continuous 25m roll |
How much do I need?
Add up the length of every edge to be covered and allow about 5% for cutting. Example: four racking bays, each with two 2.7m beams to protect, need 8 x 2.7m = 21.6m, plus about 1.1m spare = 22.7m, so one 25m roll is enough. At 0.11kg per metre a full roll weighs about 2.75kg.
Fitting tips
- Clean off heavy grease and debris so the internal fins can bite.
- Start at one end and press firmly along the whole run so the edge seats fully in the slot.
- Cut with sharp snips or secateurs for a square end.
- Cut a small V-notch in the slot legs to take the strip round tight corners without buckling.
Complete your project
- TPE Edge Protector – 33mm x 45mm – Pack of 10 x 1m
- Round U Channel Edge Protector – 26mm Diameter
- TPE Sponge Seal – Adhesive Backed – 9.5mm x 9.5mm
Questions
Does this TPE edge protector need glue?
No. The internal fins grip the edge, so the strip pushes on and can be moved later without marking the surface.
Can the hazard edge guard be used outdoors?
Yes. The TPE resists UV, weather and water.
What edge thickness does it fit?
It suits thin sheet-metal and panel edges; push a short length onto your edge first to check the grip.
How do I cut it?
Sharp snips, secateurs or a fine-tooth saw give a clean cut.
Need help choosing safety edging? Contact our team.
Product details
| SKU | IP-TPEEP-12.5X17-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Edge Protector – 12.5mm x 17mm – 25m Roll