
Rubber & FoamSKU IP-TPEEP-20.5X28-1X10
TPE Edge Protector – 20.5mm x 28mm – 1m or 25m
Price shown updates with the option you pick.
This TPE edge protector 20.5mm x 28mm is a heavier black and yellow push-on safety strip that grips panel and racking edges, soaks up knocks and marks the hazard clearly. It is sold as a pack of ten 1m strips or as one continuous 25m roll.
At a glance
- TPE edge protector 20.5mm wide x 28mm high
- High-visibility black and yellow hazard edge guard
- Large hollow bulb over a finned gripping slot
- Push-on safety edging, no adhesive needed
- Resists UV, weather, water and dilute acids and bases
- Works from -30°C to +80°C
Typical uses
- Pallet racking beam and upright edge protection
- Guarding sharp edges on machinery and enclosures
- Hazard marking on hatches, low beams and doorways
- Impact cushioning on exposed panel edges in workshops
Which one do I need?
| Size | Best for |
| 12.5mm x 17mm | Thin sheet edges and light-duty guards |
| 20.5mm x 28mm (this one) | Racking, machine guards and thicker panels needing more cushioning |
| 33mm x 45mm | Beams, columns and the highest-impact zones |
Technical drawing
Specification
| Material | Bi-material thermoplastic elastomer (TPE) |
| Size | 20.5mm wide x 28mm high |
| Grip section | 15.5mm high, 10mm wide at the base |
| Colour | Black and yellow |
| Hardness | 42° / 90° Shore A (soft bulb / firm grip) |
| Operating temperature | -30°C to +80°C |
| Weight | 0.30kg per metre |
| Tolerance class | ISO 3302-1 E2 - L2 |
| Fixing | Push-fit, no adhesive |
| Unit of sale | Pack of 10 x 1m strips, or one 25m roll |
How much do I need?
Count the edges and their lengths. Ten separate edges of up to 1m each are covered exactly by the pack of ten 1m strips with no cutting. For longer runs, add up the total and allow about 5%: six racking beams of 2.7m need 16.2m plus about 0.8m spare = 17m, so one 25m roll covers them with 8m left for uprights. At 0.30kg per metre a 25m roll weighs about 7.5kg.
Fitting tips
- Clean off heavy grease and debris so the internal fins can bite.
- Press firmly along the whole length so the edge seats fully in the slot.
- Cut the 25m roll with heavy-duty shears or a sharp knife for a square end.
- Notch the slot legs to take the strip round corners without buckling.
Complete your project
- TPE Edge Protector – 12.5mm x 17mm – 25m Roll
- TPE Edge Protector – 33mm x 45mm – Pack of 10 x 1m
- Round U Channel Edge Protector – 26mm Diameter
Questions
Does this TPE edge protector need glue?
No. The internal fins grip the edge, so it pushes on and can be repositioned without marking the surface.
Can the hazard edge guard be used outdoors?
Yes. The TPE resists UV, weather and water.
Is it resistant to chemicals?
It resists dilute acids and bases.
What edge does it fit?
It suits sheet, panel and racking edges that fit the finned slot; push a short length on first to check the grip.
Which pack should I choose?
The 10 x 1m pack suits many short edges; the 25m roll suits long continuous runs.
Need help choosing safety edging? Contact our team.
Product details
| SKU | IP-TPEEP-20.5X28-1X10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Edge Protector – 20.5mm x 28mm – 1m or 25m