
Rubber & FoamSKU IP-TPEP-40X21-302B-STD
TPE P Section Seal – 40mm Flange x 21mm Bulb – 25m Coil
This TPE P section seal 40mm x 21mm combines a flat 40mm fixing flange with a large 21mm hollow bulb, giving a soft, deep compression seal for doors, hatches and enclosure panels with wider or uneven closing gaps. It is sold as one continuous 25m coil of black thermoplastic elastomer (TPE) that you cut to length on site.
At a glance
- P profile rubber seal: 40mm flange with a 21mm outside-diameter hollow bulb
- 17mm bore inside the bulb and a 2mm wall for a soft, deep squeeze
- Black TPE, 70° Shore A, with good shape memory after repeated closing
- Working temperature -40°C to +90°C
- Extruded to ISO 3302-1 E2 / L2 tolerances
- One 25m coil per order, cut to length with a sharp knife
Typical uses
- Door and hatch seals on steel cabinets, kiosks and plant enclosures
- Compression gasket for access panels and inspection covers
- Draught and weather seal on architectural doors and windows
- Electrical and equipment enclosure door gaskets
Which one do I need?
| P section size | Best for |
| 36.5mm flange x 12mm bulb | Small, even gaps on light doors, covers and panels |
| 40mm flange x 16mm bulb | Medium gaps on cabinet and enclosure doors |
| 40mm flange x 21mm bulb (this seal) | The largest gaps in this range, uneven frames, heavier doors and hatches |
Technical drawing
Specification
| Profile | P section (flat flange with hollow round bulb) |
| Material | Thermoplastic elastomer (TPE) |
| Colour | Black |
| Overall width | 40mm |
| Bulb outside diameter | 21mm |
| Bulb bore | 17mm |
| Wall and flange thickness | 2mm |
| Hardness | 70° Shore A |
| Temperature range | -40°C to +90°C |
| Tolerance class | ISO 3302-1 E2 / L2 |
| Unit of sale | One 25m coil |
How much do I need?
Measure the full perimeter of every opening and add about 5% for joints and trimming. Example: six cabinet doors at 800mm x 1800mm each have a perimeter of 5.2m, so 6 x 5.2m = 31.2m, plus 5% = about 32.8m, which is two 25m coils.
Fitting tips
- Clean the frame with a solvent wipe so it is dry and free of grease and dust before bonding the flange.
- Fix the flat flange with a contact adhesive suitable for TPE, or clamp it under a retaining strip or rivets.
- Position the bulb so the door face meets it squarely; close the door on a strip of paper to check for even pressure.
- Butt-join the ends tightly at the hinge side, where the seal is least disturbed.
Complete your project
- TPE Rubber P Section Seal – 40mm Flange x 16mm Bulb – 25m Coil
- TPE Rubber P Section Seal – 36.5mm Flange x 12mm Bulb – 25m Coil
- White TPE P Profile – Food Contact Grade – 30mm x 15mm – 25m Coil
Questions
What gap does a 21mm bulb P seal suit?
It is the largest bulb in our TPE P section range, for wider or uneven closing gaps. For tighter gaps choose the 16mm or 12mm bulb versions so the door still shuts easily.
Is this rubber door seal suitable for outdoor use?
Yes. TPE is waterproof and handles -40°C to +90°C, so it works on external cabinets, kiosks and plant room doors.
Will the bulb stay round over time?
TPE has good shape memory, so the bulb recovers after each closing. Avoid squeezing it fully flat, which shortens its life.
How do I fix the flange?
Bond the 40mm flange with a contact adhesive suitable for TPE, or hold it under a metal or plastic retaining strip with screws or rivets.
Need help choosing the right seal? Contact our team for advice.
Product details
| SKU | IP-TPEP-40X21-302B-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE P Section Seal – 40mm Flange x 21mm Bulb – 25m Coil