
Rubber & FoamSKU IP-TPEP-40X16-STD
TPE Rubber P Section Seal – 40mm Flange x 16mm Bulb – 25m Coil
This TPE P section seal 40mm x 16mm combines a flat fixing flange with a hollow 16mm compression bulb to close gaps on doors, hatches and equipment enclosures. It is sold as one continuous 25m coil.
At a glance
- Black P profile in 60° Shore A thermoplastic elastomer (TPE)
- 40mm overall width, including a 16mm diameter hollow bulb
- 2mm wall gives the bulb good shape memory after compression
- Flat flange for adhesive, tape or mechanical fixing
- Non-marking compound, so it will not streak paintwork or glass
- Works from -40°C to 90°C, indoors or outdoors
- Supplied as a continuous 25m coil
Typical uses
- Watertight door seal on architectural doors and glass panels
- Weather seal for electrical and automotive enclosures
- Rubber gasket on food processing equipment doors and ovens
- Sealing covers on water purification and treatment systems
- Seal strip for high voltage cabinet doors
Which one do I need?
| Application | Suggested P seal |
|---|---|
| Standard doors, hatches and enclosures | This 40mm x 16mm TPE P section |
| Larger gaps, heavier doors | TPE P extrusion 45mm x 28mm |
| Food areas needing a white seal | White TPE P extrusion 40mm x 21mm |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE) |
| Profile | P section, hollow bulb |
| Overall width | 40mm |
| Bulb diameter | 16mm |
| Wall thickness | 2mm |
| Hardness | 60° Shore A |
| Colour | Black, non-marking |
| Temperature range | -40°C to 90°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | 25m coil |
How much do I need?
Add up the perimeter of every door or opening and allow about 5% for mitred corners. A cabinet door 1800mm x 900mm needs 2 x (1.8 + 0.9) = 5.4m of seal, so one 25m coil covers four doors of that size with spare for offcuts.
Fitting tips
- Clean and degrease the frame before using adhesive or tape on the flange.
- Place the seal so the bulb meets the closing face squarely and compresses evenly.
- Lay the seal on without stretching it, or it will shrink back and open gaps at the ends.
- Mitre corners at 45 degrees for a continuous, watertight seal line.
Complete your project
- TPE P Extrusion Seal – Black – 45mm x 28mm – 25m Coil
- TPE P Extrusion Seal – Black – 50mm x 30mm – 25m Coil
- White TPE P Extrusion – Food Contact Grade – 40mm x 21mm – 25m Coil
Questions
Is this P section seal suitable for outdoor use?
Yes. TPE resists weathering and stays flexible from -40°C to 90°C.
Will this rubber door seal mark my equipment?
No. The compound is non-marking, so it will not leave black streaks on doors, glass or painted panels.
How do I fix the P seal to the frame?
Bond the flat flange with a suitable contact adhesive or double-sided mounting tape, or fix it mechanically through the flange.
Can it go round tight corners?
Gentle curves are fine. For sharp 90 degree corners, cut and mitre the seal so the hollow bulb does not kink.
How is it supplied?
Each unit is one continuous 25m coil.
Need advice on the right seal profile? Contact our team for help.
Product details
| SKU | IP-TPEP-40X16-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Rubber P Section Seal – 40mm Flange x 16mm Bulb – 25m Coil