
Rubber & FoamSKU IP-TPEU-11X12-STD
TPE Square U Channel – 11mm x 12mm for 6.5–7mm Panels – 50m Coil
This TPE square U channel 11mm x 12mm is a sturdy black rubber edge trim made to push over panels 6.5mm to 7mm thick. Its tapered inner slot grips the edge tightly without adhesive, covering sharp cut edges on sheet metal, glass and fabricated enclosures. It is sold as one continuous 50m coil.
At a glance
- Square U channel edge trim for 6.5mm to 7mm panels
- 11mm wide x 12mm high overall
- Tapered inner slot grips without adhesive
- 2mm wall thickness, 60° Shore A
- 100% recyclable thermoplastic elastomer (TPE)
- Weather, UV and chemical resistant, -40°C to 90°C
- Supplied as a continuous 50m coil
Typical uses
- Covering cut edges on 7mm sheet metal fabrications and guards
- Edge protection on 6.5–7mm glass and composite panels
- Finishing furniture, kiosk and vending machine panels
- Rubber edge protector for steps, stair treads and running boards
- Impact-absorbing safety edging in factories and warehouses
Which one do I need?
| Profile | Fits panel | Choose it when |
| 10mm x 10mm | 6mm | Panels are 6mm and you want a low trim |
| 12mm x 14mm | 6mm | 6mm panels need heavy 3mm walls |
| 11mm x 12mm (this item) | 6.5–7mm | Panels are 6.5mm to 7mm thick and you need a long 50m run |
| EPDM 9.2mm x 15mm | 6mm | You need EPDM for heat up to 120°C |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE) |
| Colour | Black |
| Overall width | 11mm |
| Overall height | 12mm |
| To fit panel thickness | 6.5mm to 7mm |
| Wall thickness | 2mm |
| Hardness | 60° Shore A |
| Operating temperature | -40°C to 90°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | One 50m coil |
How much do I need?
Add up the length of every edge you want to cover, allow about 5% for mitres and offcuts, then divide by 50. For example, fourteen enclosure doors each 0.8m x 0.8m have 44.8m of perimeter; with 5% added that is about 47m, so one 50m coil covers the job.
Fitting tips
- Measure the panel – this profile is sized for 6.5mm to 7mm and will be loose on 6mm sheet.
- Clean and de-burr the edge, then push the channel on firmly, starting at one end and working along without stretching it.
- Mitre the channel at sharp corners for a neat, continuous finish.
- Because it is not bonded, the trim can be lifted off and reused when panels are changed.
Complete your project
- TPE Square U Channel 12mm x 14mm for 6mm Panels
- TPE Square U Channel 10mm x 10mm for 6mm Panels
- EPDM Square U Channel 9.2mm x 15mm for 6mm Panels
Questions
Do I need adhesive to fit this square U channel?
No. The tapered slot grips panels from 6.5mm to 7mm thick on its own; add adhesive only where there is heavy vibration.
Will it fit a 6mm panel?
It will be loose on 6mm. Choose the 10mm x 10mm or 12mm x 14mm profile for 6mm sheet.
Is this rubber edge trim suitable for outdoor use?
Yes. TPE resists weathering, UV and many chemicals, and works from -40°C to 90°C.
How do I cut the coil to length?
Use a sharp trimming knife or industrial shears and cut square for a tight butt joint.
Can offcuts be recycled?
Yes. The TPE compound is 100% recyclable.
Not sure which profile suits your panel? Contact our team with the panel thickness and we will point you to the right channel.
Product details
| SKU | IP-TPEU-11X12-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 11mm x 12mm for 6.5–7mm Panels – 50m Coil