
Rubber & FoamSKU IP-TPEU-11X12-STD
TPE Square U Channel – 11mm x 12mm for 6.5–7mm Panels – 50m Coil
A sturdy square-section U channel for capping the raw edges of 6.5mm to 7mm sheet, glass and board. The profile is 11mm wide at the base and 12mm high, with 2mm walls and a 2mm base. Its sides lean slightly inwards, so the slot is narrowest at the mouth: it opens as it is pushed over the panel and then pinches both faces along 10mm of grip, holding without adhesive. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 50m coil and held in stock.

At a glance
- Fits sheet, glass and panel edges 6.5mm to 7mm thick
- 11mm wide x 12mm high overall
- Tapered slot pinches the panel at the mouth for a firm, glue-free grip
- 10mm-deep gripping arms cover a wide band of each face
- 2mm walls and base: stiff enough to keep its shape, soft enough to cushion knocks
- 60 Shore A TPE: resists UV, weathering, chemicals and repeated flexing
- Removable and reusable; cuts cleanly with a knife; fully recyclable
- Black, 50m coil, about £12.85 per metre inc VAT
Typical uses
- Capping sharp edges on 7mm sheet-metal and polycarbonate machine guards
- Edge finish on 6.5mm laminated glass and acrylic screens
- Vending machine, kiosk and display cabinet panels
- Running boards, step and stair-edge panels
- Furniture, shelving and shopfitting panels
- Protecting sheet stock edges in handling and transport

Which size do I need?
Measure the thickness of the edge with callipers and match it to the slot. A U channel should fit snugly: on a thinner panel it sits loose, on a thicker one it splays the arms and can work off.
| Profile | Fits panel | Choose it when |
| 10mm x 10mm | 6mm | the panel is 6mm and you want a compact trim |
| 12mm x 14mm | 6mm | 6mm panels that take heavy knocks (3mm walls) |
| 11mm x 12mm (this item) | 6.5–7mm | the panel is 6.5mm to 7mm and you have long runs to cover |
| 12mm x 12mm | 8mm | the panel is 8mm thick |
Specification
| Property | Value | Standard / source |
| Profile | Square U channel with tapered (inward-leaning) arms | Supplier drawing |
| Overall width | 11.0 mm (at the base) | Supplier page and drawing |
| Overall height | 12.0 mm | Supplier page and drawing |
| Wall thickness | 2.0 mm | Supplier technical data |
| Base thickness (above slot) | 2.0 mm | Supplier drawing |
| Slot depth (gripping arm length) | 10.0 mm (12mm height less 2mm base) | Derived from supplier dimensions |
| Slot width at floor | about 7.0 mm (11mm less two 2mm walls), narrowing towards the mouth | Derived from supplier dimensions |
| Panel / edge thickness it fits (clamping range) | 6.5 mm to 7.0 mm | Supplier page |
| Material | Thermoplastic elastomer (TPE) | Supplier technical data |
| Colour | Black | Supplier page |
| Hardness | 60 Shore A | Shore A durometer (supplier page) |
| Use temperature | -40°C to +90°C | Supplier technical data |
| Dimensional tolerance | ISO 3302-1, class E2 (cross-section) / L2 (length) | ISO 3302-1 |
| Coil length | 50 m, one continuous length | Supplier page |
| Fixing | Push-on grip; no adhesive required | Supplier page |
| Density, tensile strength, elongation, tear strength, compression set | Not published for this profile; ask us if your specification needs them | – |
Material and compliance
Thermoplastic elastomer combines the flexibility of rubber with the processing of a plastic. It springs back after being squeezed, so the tapered arms keep their grip on the panel over time and the trim can be removed and refitted. It has good resistance to weathering, UV, chemicals, tear, abrasion and flex fatigue, and is 100% recyclable.
No food-contact, fire or other approvals (FDA, EC 1935/2004, WRAS, UL 94, REACH or RoHS) are stated for this profile, so we do not claim any. Ask us before using it where a certificate is required.
How much do I need?
Add up the length of every edge you want to cover, add about 5% for corners and offcuts, then divide by 50. For example, fourteen guard panels each 0.8m x 0.8m have 44.8m of edge; with 5% added that is about 47m, so one 50m coil covers the job.
Fitting tips
- Check the panel is 6.5mm to 7mm thick before ordering; on 6mm sheet the trim will be loose.
- Wipe the edge with a degreaser and de-burr it so the trim slides on and grips evenly.
- Start at one end and push the channel on by hand; tap it home with a rubber mallet if needed.
- Mitre the channel at sharp corners, or cut a small V-notch in the base to bend it round.
- Do not stretch the trim as you fit it, or it will shrink back and leave gaps at the ends.
Questions
What panel thickness does it fit?
Panels from 6.5mm to 7mm thick. On 6mm material it will sit loose; choose the 10mm x 10mm or 12mm x 14mm profile instead. For 8mm panels choose the 12mm x 12mm.
Do I need adhesive?
Usually not. The tapered arms pinch the panel along 10mm of each face. Add a thin bead of adhesive in the slot only on vibrating machinery or where the trim could be pulled off.
Will it go round corners?
It follows gentle curves. For square corners, mitre-cut the trim at 45° or cut a V-notch in the base so it folds neatly round the corner.
How do I cut and join it?
Cut with a sharp knife, shears or a fine-toothed saw for a square end. Butt the ends together tightly; a drop of cyanoacrylate (superglue) makes a neat permanent joint.
Can it be used outdoors or in the cold?
Yes. TPE resists UV light, weathering and many chemicals, and the supplier rates this profile from -40°C to +90°C.
What is TPE and how does it differ from rubber?
TPE is a thermoplastic elastomer: it behaves like a soft rubber in use but can be melted and recycled. At 60 Shore A it is firm enough to hold its square shape and soft enough to cushion knocks.
Is it suitable for glass?
Yes. It is used to cover the edges of 6.5mm to 7mm glass, acrylic and polycarbonate screens, protecting both the panel and the people handling it.
How quickly will it arrive?
This trim is held in stock and ships from our UK warehouse; see the dispatch message above the basket button for today's cut-off.
Not sure which profile suits your panel? Contact our team with the panel thickness, or call +44 1282 277786, and we will point you to the right channel.
Product details
| SKU | IP-TPEU-11X12-STD |
|---|---|
| Weight | 7.72 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 11mm x 12mm for 6.5–7mm Panels – 50m Coil