
Rubber & FoamSKU IP-TPEUC-16X18X10-STD
TPE Square U Channel – 16mm x 18mm for 10mm Panels – 25m Coil
This TPE square U channel 16mm x 18mm is a flexible edge protector made to push onto 10mm panels. Its slot narrows from 10mm at the root to 8mm at the mouth, so it squeezes the panel and grips without adhesive. Sold as one continuous 25m coil in black.
At a glance
- Square-profile U channel edge trim, 16mm wide x 18mm high
- Made for 10mm thick panels, sheets and boards
- Tapered slot grips the edge firmly; no glue or clips needed
- 3mm walls and base give a neat, square finish
- Flexible 60° Shore A thermoplastic elastomer (TPE)
- Works from -40°C to 90°C, resists weathering, UV and many chemicals
- One 25m coil per unit; 100% recyclable
Typical uses
- Edge protection on 10mm sheet metal and fabricated panels
- Cushioned edging for 10mm glass and glazing panels
- Trimming vehicle steps and running boards
- Finishing commercial furniture, worktops and vending machine edges
- Impact protection on stair nosings and platform edges
Which one do I need?
| Panel and need | Suggested square U channel |
| 4mm panels | 12mm x 16mm square U channel |
| 10mm panels, low profile | 14mm x 14mm square U channel |
| 10mm panels, deeper grip and taller edge | This 16mm x 18mm square U channel |
| 8mm to 10mm panels, wide shallow trim | 22mm x 12mm square U channel |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE) |
| Profile size | 16mm wide x 18mm high |
| To fit panel | 10mm |
| Slot | 8mm at the mouth, 10mm at the root |
| Wall and base thickness | 3mm |
| Hardness | 60° Shore A |
| Colour | Black |
| Operating temperature | -40°C to 90°C |
| Tolerance class | ISO 3302-1 E2 / L2 |
| Unit of sale | One 25m coil |
Installation and care
Push the channel over the clean panel edge until the panel bottoms out in the slot; the taper then holds it tight. Cut to length with sharp shears or a fine-toothed saw. The trim can be removed and refitted, and cleans with mild soapy water.
Fitting tips
- Deburr metal edges first so they cannot cut into the slot.
- Work along the edge in short sections, pressing rather than stretching the trim.
- For a neat square corner, mitre two pieces at 45° instead of bending the profile.
- Check the panel really is 10mm: thinner sheets will feel loose in this size.
Complete your project
- TPE Square U Channel – 14mm x 14mm for 10mm Panels – 25m Coil
- TPE Square U Channel Edge Trim – 22mm x 12mm for 8–10mm Panels – 25m Coil
- TPE U Channel – 16mm x 21mm Profile for 5mm to 8mm Panels – 25m Roll
Questions
Do I need to glue this square U channel in place?
No. The tapered slot grips a 10mm panel on its own, so it can be fitted and removed without adhesive.
Can it be used outdoors?
Yes. TPE resists weathering and UV and stays flexible from -40°C to 90°C.
How do I cut it?
Use sharp heavy-duty scissors, secateurs or a fine-toothed saw for a clean square end.
What is the difference from the 14mm x 14mm size?
Both fit 10mm panels; this 16mm x 18mm edge protector is taller, with a deeper slot that covers more of each face.
Is it recyclable?
Yes, the TPE is 100% recyclable.
Need help choosing the right edge protection? Contact our team.
Product details
| SKU | IP-TPEUC-16X18X10-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 16mm x 18mm for 10mm Panels – 25m Coil