
Rubber & FoamSKU IP-TPEUC-22X12-STD
TPE Square U Channel Edge Trim – 22mm x 12mm for 8–10mm Panels – 25m Coil
This TPE square U channel 22mm x 12mm is a push-on edge trim for 8mm to 10mm panels, with a cushioned bubble base and gripping ridges that hold it on without adhesive. It is sold as one continuous 25m coil in high-visibility yellow.
At a glance
- Overall profile 22mm wide x 12mm high – a square U channel edge protector
- Clamps panels from 8mm to 10mm thick
- Bubble base absorbs knocks; tapered inner ridges grip the edge
- Push-fit rubber edge trim – no glue, removable and reusable
- Yellow TPE, 60 Shore A, for -40°C to +70°C
- Resists flexing, weathering, UV and common chemicals; 100% recyclable
Typical uses
- Capping sharp sheet-metal and machine guard edges
- Finishing glazing and polycarbonate panel contours
- Protecting running boards and step edges on vehicles and plant
- Edging vending machines, cabinets and furniture panels
- High-visibility marking of stair and platform edges
Which one do I need?
| Panel thickness | Suggested edge trim |
|---|---|
| Up to 3mm | EPDM square U channel 6mm x 8mm |
| 7mm to 8mm, food areas | Beige TPE U channel 20mm x 31mm |
| 8mm to 10mm, high visibility | This TPE square U channel 22mm x 12mm |
| 10mm, heat or food contact | Silicone U channel 15mm x 20mm |
Technical drawing
Specification
| Profile | Square U channel with bubble base |
| Overall size | 22mm wide x 12mm high |
| Panel clamping range | 8mm to 10mm |
| Wall thickness | 4mm (thinnest), 5mm (thickest) |
| Material | Thermoplastic elastomer (TPE) |
| Colour | Yellow |
| Hardness | 60 Shore A |
| Operating temperature | -40°C to +70°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | One 25m coil |
How much do I need?
Measure every edge you want to cover and add about 5% for mitres and trimming. Example: a machine guard with four panels, each with a 1.2m top edge and two 0.9m side edges, needs 4 x (1.2 + 0.9 + 0.9) = 12m, or about 12.6m with allowance – comfortably inside one 25m coil, with enough left for a second guard of the same size.
Fitting tips
- Deburr and wipe the panel edge so the ridges seat fully.
- Start at a corner and press the channel on by hand, working along the edge; a rubber mallet helps on 10mm panels.
- Cut with a sharp knife or shears; mitre at 45° on outside corners for a neat finish.
- On thinner panels than 8mm the grip drops – choose a smaller channel instead.
Complete your project
- TPE edge protector 33mm x 45mm, black/yellow
- Beige TPE U channel 20mm x 31mm
- Solid EPDM U channel 26mm x 26mm for 10mm panels
Questions
Do I need adhesive to fit this U channel?
No. The tapered inner ridges grip 8mm to 10mm panels firmly, so the edge trim pushes on by hand and can be removed and reused.
Will it fit a 6mm panel?
Not securely. The clamping range starts at 8mm; for thinner sheet choose a smaller rubber U channel.
Can it be used outdoors?
Yes. TPE resists UV and weathering and stays flexible from -40°C to +70°C.
Why yellow?
The bright colour marks edges and steps clearly, making this edge protector useful as a visual hazard warning as well as a cushion.
How is it supplied?
As a single continuous 25m coil, so long runs need no joins.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-TPEUC-22X12-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel Edge Trim – 22mm x 12mm for 8–10mm Panels – 25m Coil