
Rubber & FoamSKU IP-TPEUC-9X11.5X6-STD
TPE Square U Channel – 9mm x 11.5mm for 6mm Panels – 25m Coil
A slim square-section push-on trim for capping the cut edges of 6mm sheet. The profile is 9mm wide and 11.5mm tall, with a parallel 6mm slot running 10mm deep. Those long arms hold both faces of the panel by friction, so in most jobs it goes on by hand with no adhesive and can be pulled off and refitted. The walls and base are only 1.5mm thick, which keeps the finished edge neat and lets trimmed sheets stack closely. It is extruded from black 60 Shore A thermoplastic elastomer (TPE), supplied as one continuous 25m coil, and held in stock.

At a glance
- Fits sheet and panel edges 6mm thick
- 9mm wide x 11.5mm high, 6mm slot 10mm deep
- 10mm gripping arms: a friction fit that usually needs no glue, removable and reusable
- Slim 1.5mm walls and base: a low, tidy edge that lets panels stack closely
- 60 Shore A TPE: firm enough to keep its square shape, soft enough to absorb knocks
- Resists UV, weathering, chemicals and repeated flexing; cuts cleanly with a knife; recyclable
- Black, 25m coil, about £19.66 per metre
Typical uses
- Capping sharp edges on 6mm sheet-metal guards, covers and enclosure panels
- Edge finish on 6mm glass, acrylic and polycarbonate panels and glazing contours
- Vending machine, kiosk and cabinet panels
- Furniture, shelving and shopfitting panels made from 6mm board
- Stair and step edges, running boards and light vehicle panels
- Protecting 6mm sheet stock edges during handling and storage
Which size do I need?
Measure the edge you want to cover and match it to the slot. For 6mm edges, and the sizes either side:
| U channel | Fits edge thickness | Choose it when |
|---|---|---|
| TPE Square U Channel 9mm x 11.5mm (this one) | 6mm | You want the slimmest 6mm trim, with thin 1.5mm walls and long 10mm arms |
| TPE Square U Channel 10mm x 10mm | 6mm | You want a lower, sturdier trim with 2mm walls |
| TPE Square U Channel 12mm x 14mm | 6mm | You want a heavier trim with more impact protection |
| TPE Square U Channel 9mm x 16mm | 5mm | Your sheet is 5mm thick |
| TPE Square U Channel 14mm x 14mm | 10mm | Your board is 10mm thick |
Specification
| Property | Value | Test method / source |
|---|---|---|
| Profile and dimensions | ||
| Profile | Square-section U channel with parallel slot (push-on edge trim) | – |
| Overall width | 9.0 mm | Nominal, ISO 3302-1 class E2 |
| Overall height | 11.5 mm | Nominal, ISO 3302-1 class E2 |
| Slot width | 6.0 mm | Nominal |
| Slot depth (gripping arm length) | 10.0 mm | Nominal |
| Wall thickness | 1.5 mm | Nominal |
| Base thickness under slot | 1.5 mm | Nominal |
| Fits edge / panel (clamping range) | 6 mm to 6 mm | Manufacturer datasheet |
| Bending radius | 100 mm to 400 mm depending on bend direction; mitre tighter corners | Manufacturer datasheet |
| Dimensional tolerance | Cross-section class E2, length class L2 (quality level 2) | ISO 3302-1 |
| Weight | 48 g per metre (approx. 1.2 kg per 25 m coil) | Manufacturer datasheet |
| Material | ||
| Material | Thermoplastic elastomer (TPE) | – |
| Hardness | 60 Shore A | Shore A durometer (ISO 48-4) |
| Working temperature | -25 °C to +70 °C | Manufacturer datasheet (a wider -40 °C to +90 °C is quoted elsewhere; we list the more cautious datasheet figure) |
| Environmental resistance | UV, weathering, chemicals, flex fatigue; good tear and abrasion resistance | Manufacturer data |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile; ask us if you need them | – |
| Supply | ||
| Colour | Black | – |
| Unit of sale | One continuous 25 m coil | – |
| Availability | Held in stock | – |
Material and compliance
TPE is a rubber-like material that is processed like a plastic. It gives a consistent, rubbery feel, needs no vulcanising, and can be recycled at end of life.
- Weathering: stable in sunlight and outdoor conditions, and resists ageing
- Chemical resistance: stands up to water, mild cleaning agents and general workshop exposure
- Flex life: recovers its shape after being bent or compressed, so the grip lasts and the trim can be refitted
- Tolerances: extruded to ISO 3302-1, the standard tolerance scheme for rubber and elastomer extrusions
No food-contact, potable-water, fire-rating or other approvals are stated for this profile, so we do not claim any. If your application needs a certificate, contact us before ordering.
Fitting
- Deburr the panel edge so it cannot cut into the slot.
- Wipe the edge with a degreaser and let it dry; this noticeably improves the grip.
- Start at one end and press the channel onto the edge with your thumbs, working along the length. Do not stretch it.
- Cut to length with a sharp knife or shears. Mitre external corners at 45°; gentle curves can be followed without cutting.
- For a permanent fix in high-traffic areas, run a thin bead of a suitable adhesive inside the slot before fitting.
Frequently asked questions
What panel thickness does it fit?
6mm. The slot is 6mm wide, so it is designed for 6mm sheet, glass or board. On thinner material it will be loose; for 5mm sheet use the 9mm x 16mm profile, and for 10mm board the 14mm x 14mm.
How do I fit it, and does it need glue?
Push it onto a clean, deburred edge by hand. The 10mm arms grip both faces by friction, which is enough for most guards, panels and furniture. Add adhesive only where the trim will be knocked or pulled repeatedly.
How do I cut and join it?
It cuts cleanly with a sharp knife or shears. Mitre corners at 45° and butt the ends together; a drop of cyanoacrylate (superglue) on the end faces gives a neat closed joint.
Will it go round corners and curves?
It follows gentle curves. The datasheet bending radius is 100mm to 400mm depending on direction, so tighter corners should be mitred rather than bent.
What temperatures can it handle?
-25°C to +70°C on the manufacturer datasheet. That covers indoor use and normal UK outdoor exposure. It is not for ovens, exhausts or other hot surfaces.
What is it made of, and can it go outdoors?
60 Shore A thermoplastic elastomer (TPE). It resists UV, weathering and common chemicals, so it suits outdoor guards, signs and vehicle panels as well as indoor use. It is fully recyclable.
How much do I get?
One continuous 25m coil, about £19.66 per metre. It weighs about 1.2kg.
Need help choosing an edge trim? Contact our team, call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-TPEUC-9X11.5X6-STD |
|---|---|
| Weight | 3.31 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Square U Channel – 9mm x 11.5mm for 6mm Panels – 25m Coil