
Rubber & FoamSKU IP-TPEU-18X28X6-25M
Heavy Duty TPE U Channel – 18mm x 28mm, 9mm Base, for 6mm or 6.5mm Panels – 25m Coil
Price shown updates with the option you pick.
A heavy duty black TPE U channel, 18 mm wide and 28 mm high, that pushes onto 6 mm or 6.5 mm sheet, plate and glass edges. A solid 9 mm thick base sits over the edge and takes knocks from trolleys, tools and people. Tapered inner walls clamp the panel, so it needs no adhesive. It is sold as one continuous 25 m coil, which you cut to length on site.
Choose your panel thickness
The channel comes in two versions. Both are 18 x 28 mm with a 9 mm base. They differ in slot width and in the shape of the base. Choose the one that matches your edge. Measure the panel with calipers if you are not sure.
| Option | Fits panel | Slot at base | Base shape | Weight | Price (inc VAT) |
|---|---|---|---|---|---|
| 6 mm panel | 6 mm only | 6.0 mm | Faceted, straighter flanks | 323 g/m (about 8.1 kg per coil) | £698.01 per 25 m coil (£27.92/m) |
| 6.5 mm panel | 6.5 mm only | 6.5 mm | Round teardrop | Not published | £695.94 per 25 m coil (£27.84/m) |
At a glance
- 18 mm wide x 28 mm high. A solid 9 mm base gives impact protection over the edge.
- Tapered slot is 19 mm deep and narrows to a mouth of about 2 mm. The lips spread over the panel and grip it.
- Push-fit with no adhesive. It can be taken off and refitted.
- 60 Shore A thermoplastic elastomer (TPE). It is flexible, resists fatigue, tearing and abrasion, and is 100% recyclable.
- Resists weathering and chemicals, for indoor and outdoor use.
- Made to ISO 3302-1 tolerance class E2 / L2.
Technical drawings


Both drawings are to scale. Values marked ≈ were scaled from the manufacturer's drawing and are not stated dimensions.
Specification
| Property | 6 mm panel version | 6.5 mm panel version | Method / source |
|---|---|---|---|
| Overall width (max.) | 18 mm | 18 mm | Manufacturer drawing |
| Overall height | 28 mm | 28 mm | Manufacturer drawing |
| Panel / edge thickness it fits (clamping range) | 6 mm only | 6.5 mm only | Manufacturer data |
| Slot width at base | 6.0 mm | 6.5 mm | Manufacturer drawing |
| Slot depth | 19 mm (28 − 9) | 19 mm | Manufacturer drawing |
| Solid base thickness (thickest point) | 9 mm | 9 mm | Manufacturer data |
| Mouth opening (free state) | ≈2 mm | ≈2 mm | Scaled from drawing |
| Width across top lips | ≈7.5 mm | ≈6 mm | Scaled from drawing |
| Material | Thermoplastic elastomer (TPE), single material | Manufacturer data | |
| Hardness | 60 Shore A | Shore A durometer, manufacturer data | |
| Colour | Black | Manufacturer data | |
| Service temperature | −25 °C to +70 °C | Manufacturer datasheet (see note) | |
| Weight | 323 g/m | Not published | Manufacturer datasheet |
| Bending | Shown bending round 100 mm and 200 mm radii | Not published | Manufacturer datasheet diagram |
| Dimensional tolerance | ISO 3302-1 class E2 / L2 (Quality Level 2) | ISO 3302-1 | |
| Density, tensile strength, elongation, tear, compression set | Not published for this profile | Ask us if you need test data | |
| Coil length | 25 m continuous | Unit of sale | |
Temperature note: the manufacturer's datasheet and technical table give −25 °C to +70 °C. Their feature lists quote wider ranges (−40 °C to +90 °C for the 6 mm version and −50 °C to +90 °C for the 6.5 mm version). We quote the more cautious datasheet figure.
Materials and compliance
Both versions are made from one black thermoplastic elastomer (TPE) at 60 Shore A. The manufacturer states the material is 100% recyclable and resists weathering, ageing and chemicals. The manufacturer does not state any food-contact, fire-rating, WRAS, REACH or RoHS approval for this profile, so we do not claim one. If your project needs a certificate, contact us before ordering.
Fitted on the panel

Typical uses
- Bump edging on 6 mm and 6.5 mm steel or aluminium machine guards and enclosures
- Protecting the edges of 6 mm glass, polycarbonate or acrylic panels and glazing
- Edges of running boards, step plates and stair stringers
- Vending machine, kiosk and display cabinet panel edges
- Furniture and shop-fitting panels that take regular knocks
How much do I need?
Add up the length of every edge you want to cover, then add about 5% for trimming. Example: six guard panels of 1.0 m x 0.8 m trimmed on all four sides need 6 x 3.6 m = 21.6 m. Add 5% and you need about 22.7 m, so one 25 m coil is enough.
Fitting tips
- Deburr the edge and wipe it with grease remover. A clean, dry edge grips best.
- Start at one end. Press the channel on with your thumbs so the edge reaches the bottom of the 19 mm slot. On long runs, tap it home with a rubber mallet.
- At outside corners, cut a small V-notch in the lips so the channel turns without kinking, or mitre and butt two lengths.
- Cut square with a sharp knife. Leave a few millimetres extra so the ends butt tightly.
Frequently asked questions
Which version do I need, 6 mm or 6.5 mm?
Measure the edge with calipers and choose the version that matches it. Pick 6 mm for 6 mm sheet such as 6 mm glass or polycarbonate, and 6.5 mm for edges that measure 6.5 mm. Each version is made for one thickness only.
Will it fit a 5 mm or 8 mm panel?
No. On thinner panels it will be loose, and on thicker ones it will not seat fully. For 5.5 mm to 6.5 mm try our 12 x 23 mm TPE U channel. For 5 mm to 8 mm try the 16 x 21 mm. For 7 mm panels use the 25 x 34 mm.
Do I need glue?
No. The tapered slot and narrow lips grip the panel on their own, so you can take the channel off and refit it. If the trim must never move, use a bonding agent suitable for TPE, but you will then not be able to reuse it.
Can I use it outdoors?
Yes. TPE resists weathering, ageing and many chemicals. It is rated for −25 °C to +70 °C on the manufacturer's datasheet.
What is TPE and how is it different from EPDM rubber?
TPE is a thermoplastic elastomer. It feels and flexes like rubber, but it can be melted and recycled. At 60 Shore A it is firm enough to grip well and soft enough to cushion impacts.
How do I cut and join it?
Cut it with a sharp utility knife or fine-toothed saw. Butt joints need no adhesive. For a sealed joint, use a cyanoacrylate adhesive suitable for TPE on the cut faces.
Will it go round curves?
Yes. The manufacturer's datasheet shows the 6 mm version bending round 100 mm radii. On tighter curves, notch the lips as you would at a corner.
Is it in stock?
Yes. Both versions are held in stock as 25 m coils and dispatched as shown on this page.
Related edge protection
- TPE U Channel – 14 x 25 mm for 6 mm panels: a slimmer trim for 6 mm edges
- TPE U Channel – 12 x 23 mm for 5.5 to 6.5 mm panels
- TPE U Channel – 25 x 34 mm for 7 mm panels
- TPE U Channel – heavy duty 22 x 52 mm for 10 mm panels
Need help choosing? Call +44 1282 277786 or email sales@industrial-polymers.co.uk with your panel thickness.
Product details
| SKU | IP-TPEU-18X28X6-25M |
|---|---|
| Weight | 18.96 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Heavy Duty TPE U Channel – 18mm x 28mm, 9mm Base, for 6mm or 6.5mm Panels – 25m Coil