
Rubber & FoamSKU IP-PVCDF-76X42-3
Hollow PVC D Fender – 76mm x 42mm – 3m or 9m Length
Price shown updates with the option you pick.
This hollow PVC D fender 76mm x 42mm is a non-marking impact strip that absorbs knocks on pontoons, jetties, boat sides and loading bays. It is sold as a single straight length of 3m or 9m, with a flat 76mm back for fixing and a rounded 42mm deep face with an 11mm wall.
At a glance
- Hollow D section, 76mm wide x 42mm deep
- Thick 11mm wall around a 54mm wide hollow core
- Non-marking black PVC, 67° Shore A
- UV-stabilised and weather resistant
- Phthalate-free and 100% recyclable
- Working temperature -40°C to +60°C
- Sold as one length of 3m or 9m, about 2.26kg per metre
Typical uses
- Edge protection on pontoons, jetties and boarding steps
- Rubbing strip along boat sides and port walls
- Bump strip on loading bay edges for lorries and vans
- General impact protection on walls, columns and equipment in yards
Which one do I need?
| Size (W x D) | Typical job | Lengths |
|---|---|---|
| 32mm x 24mm hollow PVC D | Light rubbing strip on small boats and trailers | 9m to 30m rolls |
| 76mm x 42mm hollow PVC D (this item) | Pontoon and jetty edges, light loading bay protection | 3m or 9m |
| Hollow TPE delta D fenders 110mm to 150mm | Heavier dock and loading bay protection | packs of 2 x 5m |
Technical drawing
Specification
| Profile | Hollow D fender |
| Size | 76mm wide x 42mm deep |
| Wall thickness | 11mm |
| Material | PVC (polyvinyl chloride), phthalate-free |
| Hardness | 67° Shore A |
| Colour | Black, non-marking |
| Temperature range | -40°C to +60°C |
| Weight | 2.26kg per metre |
| Unit of sale | One length, 3m or 9m |
How much do I need?
Measure the edge you need to protect and round up to whole lengths. Example: a 12m pontoon finger protected along one side needs 12m, which is one 9m length plus one 3m length; a 2.4m wide loading bay edge needs one 3m length, leaving 0.6m spare for a short return. Lengths can be butted end to end with a neat square cut.
Fitting tips
- Fix through the flat back with stainless steel bolts or screws and large washers, spaced evenly along the length.
- Drill clearance holes through the fender wall; counterbore the face so bolt heads sit below the rubbing surface.
- Leave a small gap at butt joints to allow for thermal movement on long outdoor runs.
- For gentle curves, warm the PVC slightly before fitting so it bends without kinking.
- Cut square with a fine-toothed saw and chamfer exposed ends if needed.
Complete your project
- TPE Delta D Fender – 110mm x 95mm – 2 x 5m Pack
- TPE B Fender – Solid 80mm x 40mm, Non-Marking – 25m Coil
- Double D Fender Strip – 44 x 19mm Neoprene with Stainless Steel Insert
Questions
Will the 76mm x 42mm PVC D fender mark boats or vehicles?
No. It is made from a non-marking PVC compound, so it does not leave black marks on hulls or bodywork.
Can it be used outdoors and in marine areas?
Yes. The PVC is UV-stabilised and weather resistant and works from -40°C to +60°C.
How is it fixed?
Bolt or screw through the flat back onto a sound, flat surface, or slide it into a suitable channel. It is easy to drill and cut on site.
What lengths are available?
It is sold as a single straight length of 3m or 9m.
Is it recyclable?
Yes. The compound is phthalate-free and 100% recyclable.
Not sure which size you need? Contact our team and we will help you choose.
Product details
| SKU | IP-PVCDF-76X42-3 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow PVC D Fender – 76mm x 42mm – 3m or 9m Length