Products – Page 69

For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Showing 1633 - 1656 of 2545 products

Close view across a prismatic acrylic sheet, rows of small moulded prisms on the face above a square-cut edge

Square prismatic acrylic diffuser glowing in a suspended-ceiling light fitting, seen at an angle from below

Prismatic Acrylic Sheet 3mm A4 Pack of 5 - Light Diffuser Panels

£41.99 inc VAT

Five white PTFE rods of mixed diameters piled in a criss-cross on a plain white background

Several white PTFE rods of differing diameters stacked on a bench with callipers and drawings

PTFE Natural Rod 4mm to 65mm Diameter High Temperature & Chemical Resistant

From £12.90 inc VAT

Translucent white PTFE rod set diagonally on white, rounded cut end nearest the camera

Whole white PTFE rod on a bright white ground, waxy matt surface and a clean round end face

PTFE Natural Rod for Low Friction Applications 4mm to 120mm diameter

From £1.60 inc VAT

White square PTFE sheet lying angled on white, thin square edge visible along the front

Thin white PTFE sheet on a workbench with ring gaskets punched from it, wad punch and mallet beside, bench vice behind

PTFE Natural Sheet for High-Temperature Applications 0.25mm to 30mm thick

From £9.04 inc VAT

Thick square white PTFE slab on white, deep sawn edge running along the near sides

Square white PTFE sheet angled on white, matte face and a clean sawn edge along the front

PTFE Natural Sheet for High-Temperature Applications 40mm to 50mm thick

From £1,019.68 inc VAT

Thick-walled white PTFE tube cropped close, the bore visible in its sawn end face turned towards the camera

Opaque white PTFE tube on a workbench surrounded by brass fittings, O-rings and spanners, pegboard behind.

PTFE Plastic Tube: 80mm OD to 100mm OD

From £544.19 inc VAT

Gloved hands holding a large white PTFE billet, stacks of white PTFE rings behind

Three white PTFE billets in descending diameter grouped on a plain white background

PTFE Rod 150mm Length 300mm Diameter for Industrial Applications

£3,211.56 inc VAT

Black-gloved hands holding a long white PTFE rod by a steel bench, rounded end face to the camera

Short white PTFE rod on a white ground, angled with its softly lit round cut end at the lower left

PTFE Rod 6–120mm | Low-Friction Engineering Plastic

From £11.40 inc VAT

Black-gloved hands holding a white PTFE rod, steel bearing races stacked behind

Two long white PTFE bars with a stubby offcut tucked between them, all three cut faces to the front

PTFE Rod Filled with Glass - 25mm to 50mm Diameter Options

From £120.86 inc VAT

Grey-and-cream gloves holding a large white PTFE billet end-on, steel flanges behind

One wide white PTFE billet with two smaller stubs stepping away to the right, plain white ground

PTFE Rod Filled with Glass - Diameter 170mm to 200mm

From £1,028.76 inc VAT

White knitted glove holding a small white PTFE rod, white rings and bearings behind

Chunky white PTFE bar with two pencil-slim ones alongside, round cut faces towards the viewer

PTFE Rod Filled with Glass – Diameter Range 10mm to 20mm

From £43.24 inc VAT

Pale grey gloves holding a bright white PTFE billet, machined steel rings behind

A pair of heavy white PTFE bars lying together on white, broad matt end discs angled to the lens

PTFE Rod Glass Filled 60mm to 150mm Diameter Options

From £164.56 inc VAT

Grey glove holding a white PTFE rod, white bushes and steel bearings behind

Three white PTFE rods in differing diameters lying diagonally on a plain white studio background, cut ends forward

PTFE Rods for Engineering: Diameters 30mm to 120mm

From £116.98 inc VAT

Grey and black gloves holding a white PTFE billet, bearing races and white bushes behind

Two large white PTFE rods side by side on a plain white background, flat cut faces angled towards the camera

PTFE Rods for Industrial Use 130mm to 200mm Diameter

From £750.18 inc VAT

Tan and brown gloves holding a large white PTFE billet end-on, white rings behind

Three bright white PTFE rods in stepped diameters, cropped tight against a white ground

PTFE Rods for Industrial Use 210mm to 270mm Diameter

From £1,390.08 inc VAT

Grey glove holding a slim white PTFE rod, ball bearings and white rings behind

One thick and two slim white PTFE rods grouped together on a plain white ground

PTFE Rods in 4mm to 25mm Diameters for Industrial Use

From £5.14 inc VAT

Cream knit gloves holding a thin white sheet above cut ring gaskets, stainless pumps behind

Very thin white sheet lying at an angle on white, its slim edge visible along the front

PTFE Sheet 0.25mm to 1mm Thickness for Industrial Use

From £72.58 inc VAT

Dark grey gloves tilting a large white sheet in a workshop, blue steel racking behind

Square white slab angled on white, matte face and a clean sawn edge along the front

PTFE Sheet 0.25–50mm | Low-Friction Engineering Plastic

From £12.50 inc VAT

Gloved hands holding a thick white PTFE slab in a plant room, blue valves and flanged pipework behind

White PTFE slab lying flat and angled on white, matt face with a square-cut edge showing its depth

PTFE Sheet Available in 8mm to 50mm Thickness for Industrial Use

From £530.40 inc VAT

Grey gloves holding a thick white slab above roller bearings and seals on a workbench

Thick white slab angled on a white background, deep square edge along the near side

PTFE Sheet for Industrial Use – 60mm to 80mm Thickness

From £3,838.12 inc VAT

Grey gloves holding a pale beige-grey square sheet in front of large valves and flanges

Pale grey rectangular sheet with a faintly speckled matte face, angled on white

PTFE Sheet Glass Filled - Thickness 1.5mm to 4mm - UK Stock

From £352.24 inc VAT

Dark gloves holding two thick white slabs stacked, machined steel parts on the bench behind

Two cream glass filled PTFE slabs stacked offset on white, thick square edges visible from above

PTFE Sheet Glass Filled 50mm and 60mm Thickness for Industrial Use

From £5,955.02 inc VAT

Dark gloves holding a thick off-white square slab, steel flanges and gaskets behind

Single off-white glass filled PTFE block on a plain white background, viewed at an angle from above

PTFE Sheet Glass Filled 5mm to 40mm Thickness for Industrial Use

From £611.96 inc VAT

Corner of a matte white PTFE sheet on white, textured cut edge showing the sheet thickness

White PTFE sheet lying on a steel workshop bench beside a tape measure and hand tools

PTFE Sheet Virgin Grade 0.25mm to 50mm Thickness

From £22.07 inc VAT

Previous Page 69 / 107Next

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome