For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Machining & Fabrication

263 products

Showing 73 - 96 of 263 products

Our machining & fabrication range is selected for real working conditions, not catalogue filler. Everything on this page is held in UK stock and despatched from our own warehouse.

Held in UK stock for immediate despatch
Trade and volume pricing available
Technical advice from people who use this material daily
Same-day despatch on orders before 2pm

Cut-to-size and bulk pricing available on every line. Ordered before 2pm on a working day, UK stock items ship same day. Need a size that isn't listed? Contact our technical team and we will quote it.

Showing 73 - 96 of 263 products

Length of natural white HDPE rod on a plain background, angled to show the flat sawn end

White HDPE rod on a scratched steel bench with vernier callipers and a dimensioned drawing beneath

HDPE Natural Plastic Rod - 60mm Dia.

From £41.61 inc VAT

Corner of a natural white HDPE sheet on a grey surface, square-cut edge showing the sheet thickness

White HDPE sheet on a workbench with a tape measure across it, pliers, saw and knife to one side

HDPE Natural Plastic Sheet – 1mm to 5mm | PE300 Grade | Food Safe, Low Friction & Chemical Resistant

From £17.60 inc VAT

Save £0.32 inc VAT

Thick white HDPE board on a stainless steel table in a commercial kitchen, mixer and bowls behind

Cream HDPE liner lining the V of a rusted steel hopper, bolted frame and discharge chute below

HDPE Natural Sheet Food Grade 1mm to 30mm Thickness in 10 Sizes

From £10.99 inc VAT £11.31 inc VAT

Large-diameter natural white HDPE rod billet held in two gloved hands, broad flat end face forward

Cream, black and white HDPE rods laid side by side on white, round cut ends angled to the viewer

HDPE Rod from 100mm to 180mm Diameter for Machining & Fabrication

From £244.44 inc VAT

Gloved hands holding a natural white HDPE PE300 sheet in a workshop, square-cut edge visible

Chef in whites slicing peppers and cucumber on a thick white HDPE board in a stainless steel kitchen

HDPE Sheet High Density Polyethylene PE300 Food Safe in Multiple Sizes

From £6.42 inc VAT

Save £69.22 inc VAT

Fanned stack of white HDPE sheets on a workshop bench with a tape measure and craft knife

Stack of white HDPE sheets fanned on a bench in a bright factory, assembly line and staff behind

HDPE Sheet PE300 Natural & Black 2mm to 8mm for Food & Industrial Use

From £112.99 inc VAT £182.21 inc VAT

Glossy black HDPE rod set diagonally on white, its round cut face angled towards the viewer

Matt black HDPE rod standing at a shallow angle on white, dull circular sawn end at the lower left

High Density Polyethylene Black Rod for Food Industry Applications 10mm to 225mm diameter

From £3.16 inc VAT

Heavy black HDPE billet lying across a white background, matt end face filling the left of frame

Matt black HDPE billet alone on a white sweep, round sawn face towards the lower left

High Density Polyethylene Black Rod for Food Industry Use 250mm to 300mm diameter

From £249.74 inc VAT

Black polyethylene slab angled on white, matt face and thick square-sawn edge

Thick black HDPE slab on a workshop bench with a machined black guide block cut from it, milling machine behind

High Density Polyethylene Black Sheet for Food Industry Applications 15mm to 60mm thick

From £36.24 inc VAT

Thin square black polyethylene sheet on white, soft highlight across the matt face

Thin black HDPE sheets fanned on a workbench with a cut strip and a steel rule under a strip light

High Density Polyethylene Black Sheet for Food Industry Applications 1mm to 12mm thick

From £2.96 inc VAT

Three HDPE rods side by side on white in cream, black and slim white, stepped diameters, cut ends forward

Heavy milky-white HDPE billet held in grey gloves, racked bar stock stacked out of focus behind

High Density Polyethylene Natural (milky-white) / Black Rod 100mm to 180mm dia for Containers & gears

From £244.44 inc VAT

Translucent milky-white HDPE rod set at an angle on a plain white ground, round cut face to the left

Two grey-gloved hands balancing a long black HDPE bar, brushed round end face at the right

High Density Polyethylene Natural (milky-white) / Black Rod 10mm to 50mm dia for Wear strips & tanks

From £12.00 inc VAT

Black and natural white HDPE rods resting on a stack of white and black sheet, studio shot on white

Natural milky-white HDPE bar on a white studio sweep, soft shadow beneath and cut end lower left

High Density Polyethylene Natural (milky-white) / Black Rod 200mm to 300mm dia for Insulators & sheets

From £988.90 inc VAT

Milky-white HDPE sheet resting on a black one against white, both square-cut edges facing out

Milky-white translucent HDPE square set at an angle on white, soft satin face and a neat sawn edge

High Density Polyethylene Natural (milky-white) / Black Sheet 1mm to 1.5mm thick for Piping & tanks

From £47.62 inc VAT

Three HDPE sheets stacked on white, translucent natural over black over milky-white, cut edges to front

Milky-white HDPE panel tipped towards the camera in grey knit gloves, dim workshop interior behind

High Density Polyethylene Natural (milky-white) / Black Sheet 2mm to 8mm thick for Liners & geocells

From £95.18 inc VAT

Broad translucent white HDPE rod lying diagonally on white, wide flat end nearest the camera

Chunky natural HDPE billet cradled in two grey gloves, racked bar stock blurred behind

High Density Polyethylene Natural Rod 250mm Diameter for Food Applications 250mm to 300mm diameter

From £249.74 inc VAT

Translucent milky white HDPE rod filling the frame on white, flat cut end at the lower left

Whole pale HDPE rod shown small on white, faint translucency and a round sawn end at the left

High Density Polyethylene Natural Rod for Food Industry Applications 10mm to 225mm diameter

From £3.16 inc VAT

Thick white polyethylene sheet angled on a white background, square-cut edge showing its depth

Thick natural white HDPE slab on a workshop bench with a machined wear pad and two spacers cut from it, white swarf around

High Density Polyethylene Natural Sheet for Food Industry Applications 15mm to 60mm thick

From £36.24 inc VAT

Thin white polyethylene sheet lying flat on a plain white background, one corner slightly raised

Stack of thin natural white HDPE sheets on a workbench with a gasket cut from one and a craft knife on a cutting mat

High Density Polyethylene Natural Sheet for Food Industry Applications 1mm to 12mm thick

From £2.96 inc VAT

Single natural HDPE rod photographed alone on white, pale satin surface and flat sawn end forward

Single matt black HDPE rod angled across a white background, crisp circular cut face at the left

High Density Polyethylene Rod 55mm to 90mm dia for Chain Guides & Impact Parts

From £145.00 inc VAT

Black HDPE sheet stacked on a milky-white sheet, photographed at an angle on plain white

Milky-white HDPE square set flat on a white ground, soft satin top and a neatly sawn edge

High Density Polyethylene Sheet 10mm to 30mm for Cutting Boards & Wear Strips

From £475.92 inc VAT

Grey-gloved hands holding a milky white HDPE offcut edge-on, racked stock and pallets in the yard behind

Off-white HDPE sheet lying flat at an angle on a white studio background, slim square-cut edge to the front

High Density Polyethylene Sheet 2mm to 8mm Thickness for Machining & Fabrication

From £95.18 inc VAT

Square blue polyethylene slab on white, thick sawn edge visible on two sides

Square blue polyethylene panel resting on a plain white ground, faint brushed grain across the top face

High Molecular Weight Polyethylene Blue Sheet for Food Processing 10mm to 25mm thick

From £24.32 inc VAT

Green polyethylene slab angled on white, glossy face and clean square edge

Green polyethylene board on a stainless steel table in a food processing room, filleting knife alongside, worker behind

High Molecular Weight Polyethylene Green Sheet for Food Processing 10mm to 25mm thick

From £24.32 inc VAT

Previous Page 4 / 11Next

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome