For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Machining & Fabrication

263 products

Showing 217 - 240 of 263 products

Our machining & fabrication range is selected for real working conditions, not catalogue filler. Everything on this page is held in UK stock and despatched from our own warehouse.

Held in UK stock for immediate despatch
Trade and volume pricing available
Technical advice from people who use this material daily
Same-day despatch on orders before 2pm

Cut-to-size and bulk pricing available on every line. Ordered before 2pm on a working day, UK stock items ship same day. Need a size that isn't listed? Contact our technical team and we will quote it.

Showing 217 - 240 of 263 products

Close-up of a thick white PTFE rod lying diagonally on white, its smooth cut end facing the camera

Four bright white PTFE billets in stepped diameters, sawn ends to the camera, cropped tight on a white ground

PTFE White Rod 210mm to 270mm dia for Gaskets & seals

From £1,390.08 inc VAT

Two long white PTFE bars with a short offcut between them on white, cut faces to the front

Long white PTFE rod resting on a stainless bench, gripped in black gloves, bare concrete wall behind

PTFE White Rod 30mm to 120mm dia for Wear pads & sleeves

From £116.98 inc VAT

One stout and two slim white PTFE bars grouped on white, round cut ends towards the front

Whole white PTFE bar on a bright white ground, waxy finish with the round end face at the left

PTFE White Rod 4mm to 25mm dia for Bearings & seals

From £5.14 inc VAT

White PTFE sheets on white with cut flange gaskets and rings laid in front of them

White PTFE square lying at an angle on a white ground, flat matte top and square-cut edges catching the light

PTFE White Sheet 0.25mm to 1mm thick for Gaskets & seals

From £72.58 inc VAT

Four white PTFE sheets stacked on white with square and ring gaskets cut from them in front

Square white PTFE sheet angled on white, matte face and a clean sawn edge along the front

PTFE White Sheet 1.5mm to 6mm thick for Gaskets & seals

From £121.06 inc VAT

Thick white PTFE sheets stacked on white beside round discs and a bored flange gasket

White PTFE sheet on a workshop bench with a ring gasket cut from it, a steel pipe flange and dividers marking out the next one

PTFE White Sheet 8mm to 40mm thick for Gaskets & seals

From £530.40 inc VAT

Four white PTFE tube sections of differing diameters and lengths grouped on a white background

Single thick-walled white PTFE tube lying diagonally on white, open bore towards the camera

PTFE White Tube 50mm to 120mm dia for Gaskets & chemical handling

From £153.72 inc VAT

Small crop of a pale grey PVC rod on white, streaked cut end face towards the right

Grey PVC rod on a workbench over a wiring drawing with callipers, drill presses behind

PVC Grey Plastic Rod - 150mm To 300mm Dia.

From £253.40 inc VAT

Small crop of a pale grey PVC rod on white, streaky sawn end face at the right

Grey PVC rod on a rusty bench over a technical drawing with callipers and rolled prints

PVC Grey Plastic Rod - 160mm Dia.

From £338.31 inc VAT

Cropped pale grey PVC bar on white, round sawn end catching the light at the right

Slim pale grey PVC rod on a steel workbench beside callipers, drill bits and printed drawings

PVC Grey Plastic Rod - 18mm To 30mm Dia.

From £20.34 inc VAT

Cropped pale grey PVC rod on white, its round cut face shaded towards the right

Grey PVC rod on a green-framed bench over a part drawing, vernier callipers alongside

PVC Grey Plastic Rod - 225mm Dia.

From £630.73 inc VAT

Tight crop of a light grey PVC bar on white, streaky end grain visible on the cut face

Pale grey PVC rod resting across rolled drawings on a workbench with a vice and callipers

PVC Grey Plastic Rod - 32mmTo 55mm Dia.

From £21.71 inc VAT

Close crop of a grey PVC rod against white, its round end face shaded on the right

Pale grey PVC rod on a cluttered workbench with fasteners, a rule and rolled drawings

PVC Grey Plastic Rod - 60mm To 80mm Dia.

From £42.54 inc VAT

Small crop of a light grey PVC rod on white, streaky sawn end face at the right

Charcoal-dark PVC rod on white, its paler streaky sawn end face towards the right

PVC Plastic Rod: 100mm to 180mm diameter

From £243.14 inc VAT

Four grey rigid PVC rods in stepped diameters with a black rod alongside, angled on white, round cut ends forward

Bundle of grey and black PVC rods on a steel bench in a fabrication workshop with turned grey PVC bushes beside them

PVC Rod Grey / Red / Black 6mm to 40mm Diameter - 2000mm Lengths

From £23.28 inc VAT

Leather-gloved hands holding a large mid-grey PVC billet, flat circular face to the camera

Two dark grey PVC rods, one thick and one slim, on a reflective white studio surface

PVC Rod: Diameters of 200mm to 300mm for Machining & Fabrication

From £304.28 inc VAT

Grey gloves holding a large pale grey PVC billet end-on, racked pipe stored behind

Four PVC rods angled across white, three grey in varying diameters and one black, cut ends towards the camera

PVC Rods for Engineering Applications 100mm to 180mm Diameter

From £145.22 inc VAT

Grey PVC bar cradled in knitted gloves over a stainless bench, round sawn face filling the left of frame

Four PVC bars fanned on white, three grey in descending sizes with a black one behind, ends to camera

PVC Rods for Engineering Applications 6mm to 40mm Diameter

From £23.28 inc VAT

One white PVDF rod standing upright with two shorter offcuts leaning against it, on white

Three white PVDF rod offcuts lying together and angled to the right on a plain white background

PVDF Natural Rod 10mm to 100mm Diameter Chemical Resistant & UV Stable

From £22.06 inc VAT

Five pearly white PVDF rods of decreasing diameter fanned across a white background

Three short white PVDF offcuts leaning together on white, tapering away to the upper right

PVDF Natural Rod for Chemical Processing Applications 10mm to 100mm diameter

From £13.68 inc VAT

Close crop of a translucent white sheet corner on white, thin square edge along the front

Thin translucent white PVDF sheet lying on a stainless bench with a scalpel and steel rule beside it

PVDF Natural Sheet 1000 x 500 x 1mm for Chemical Processing 1mm thick

£255.12 inc VAT

Glossy white sheet corner on white, light streaking across the polished face

Glossy white PVDF sheets stacked on a fabrication bench with a hot-air welder, welding rod coil and knife beside them

PVDF Natural Sheet for Chemical Processing and Electrical Insulation 1mm to 20mm thick

From £48.34 inc VAT

Close crop of a black polyethylene sheet corner on grey, matt face and square sawn edge

Square black polyethylene panel on a timber workbench with tape measure, knife and offcuts

RG 1000 Black Plastic Sheet - 5mm To 8mm Thick

From £24.71 inc VAT

Black polyethylene sheet angled on white, matt face with a light sheen across the top

Black UHMWPE sheet on a fabrication bench with a routed wear strip cut from it, router and black swarf around

RG1000 Black UHMWPE Sheet for Industrial Applications 5mm to 40mm thick

From £15.32 inc VAT

Previous Page 10 / 11Next

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome