
Rubber & FoamSKU IP-BFES-51X25
Neoprene B Fender End Stop – 51mm x 25mm – Pre-Punched – Each
This neoprene B fender end stop 51mm x 25mm is a moulded black rubber end cap that finishes the cut end of a 51mm x 25mm B fender run with a smooth, rounded nose. It is sold individually (each), pre-punched for fixing, so you need one for every open end of your fender line.
At a glance
- Matches 51mm wide x 25mm high B fender profiles
- 64mm deep, with a rounded nose that deflects glancing knocks
- Moulded from tough black neoprene rubber, 70° Shore A
- Pre-punched fixing holes for quick screw or bolt fixing
- Removes the sharp, snag-prone cut end where a rubber bumper strip stops
- Works indoors and outdoors
Typical uses
- Finishing B fender runs on pontoons, jetties and workboats
- Loading bay and lorry dock wall protection
- Ends of bump strips on trucks, ambulances and specialist vehicles
- Factory and warehouse wall guards beside walkways and doorways
- Shopfitting and commercial interiors where a neat fender end matters
Which one do I need?
| Your B fender | End stop |
|---|---|
| 51mm x 25mm neoprene B fender | This 51mm x 25mm end stop |
| 60mm x 32mm B fender, plain or with stainless strip | The 60mm x 32mm end stop |
Count one end stop for each free end: a straight run with both ends open needs two.
Technical drawing
Specification
| Product | B fender end stop (end cap) |
| Fits profile | 51mm x 25mm B fender |
| Depth | 64mm |
| Material | Neoprene rubber compound |
| Hardness | 70° Shore A |
| Colour | Black |
| Fixing | Pre-punched |
| Unit of sale | Each |
How much do I need?
One end stop per open end. Example: one 18.28m coil of 51mm x 25mm fender fitted as a single run along a pontoon edge, open at both ends, needs two end stops. Cut it into three separate runs between mooring cleats and you need six.
Fitting tips
- Cut the fender square so the end stop sits tight against it with no gap.
- Offer the end stop up first and mark the fixing holes before drilling.
- Use stainless or galvanised fixings outdoors and on boats to avoid rust stains.
- Tighten until the head is just seated; over-tightening distorts the rubber.
Complete your project
- Neoprene B Fender – 51mm x 25mm – 18.28m Coil
- Neoprene B Fender End Stop – 60mm x 32mm – Pre-Punched – Each
- TPE B Fender – Black – 45mm x 25mm – 25m Coil
Questions
Which fender does this end stop fit?
It is moulded to match a 51mm x 25mm B fender profile, such as our neoprene 51mm x 25mm 18.28m coil.
Are fixings included?
No. The end stop is pre-punched; choose screws or bolts to suit your wall, quay or vehicle body.
Can this rubber end cap be used outdoors?
Yes. Neoprene copes well with weather, sea air and a wide temperature range.
Is it sold in pairs?
No, the price is for one end stop. Order two for a run that is open at both ends.
Not sure which end stop matches your fender? Contact our team with the profile size and we will check it for you.
Product details
| SKU | IP-BFES-51X25 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene B Fender End Stop – 51mm x 25mm – Pre-Punched – Each