
Rubber & FoamSKU IP-BFES-60X32
Neoprene B Fender End Stop – 60mm x 32mm – Pre-Punched – Each
This neoprene B fender end stop 60mm x 32mm is a moulded black rubber end cap that finishes the exposed end of a 60mm x 32mm B fender run with a smooth, rounded nose. It is sold individually (each), pre-punched for fixing, so you need one for every open end of your fender line.
At a glance
- Matches 60mm wide x 32mm high B fender profiles
- 64mm deep, with a rounded nose that deflects glancing knocks
- Moulded from tough black neoprene rubber, 70° Shore A
- Pre-punched fixing holes for quick screw or bolt fixing
- Removes the sharp cut end where a fender run stops
- Works indoors and outdoors
Typical uses
- Finishing the ends of B fender runs on quaysides, pontoons and boats
- Loading bay and lorry dock wall protection
- Ends of bump strips on trucks, ambulances and specialist vehicles
- Factory and warehouse wall guards beside walkways and doors
- Shopfitting and commercial interiors where a neat fender end matters
Which one do I need?
| Your B fender | End stop |
|---|---|
| 60mm x 32mm, plain or with stainless strip | This 60mm x 32mm end stop |
| 51mm x 25mm neoprene B fender | The 51mm x 25mm end stop |
Count one end stop for each free end: a straight run with both ends open needs two.
Technical drawing
Specification
| Product | B fender end stop (end cap) |
| Fits profile | 60mm x 32mm B fender |
| Depth | 64mm |
| Material | Neoprene rubber compound |
| Hardness | 70° Shore A |
| Colour | Black |
| Fixing | Pre-punched |
| Unit of sale | Each |
How much do I need?
One end stop per open end. Example: a single 12m fender run along a loading bay wall, open at both ends, needs two end stops. Two separate runs either side of a doorway need four.
Fitting tips
- Cut the fender square so the end stop sits tight against it with no gap.
- Offer the end stop up first and mark the fixing holes before drilling the wall.
- Use stainless or galvanised fixings outdoors and on boats to avoid rust stains.
- Tighten until the head is just seated; over-tightening distorts the rubber.
Complete your project
- EPDM Rubber B Fender – 60mm x 32mm – 12m Roll
- EPDM Rubber B Fender – 60mm x 32mm with Stainless Steel Strip – 12m Roll
- EPDM Rubber B Fender – 76mm x 32mm – 12m Roll
Questions
Which fender does this end stop fit?
It is moulded to match a 60mm x 32mm B fender profile, including our EPDM 60mm x 32mm rolls with or without a stainless strip.
Are fixings included?
No. The end stop is pre-punched; choose screws or bolts to suit your wall, quay or vehicle body.
Can it be used outdoors?
Yes. Neoprene copes well with weather, sea air and a wide temperature range.
Is it sold in pairs?
No, the price is for one end stop. Order two for a run that is open at both ends.
Not sure which end stop matches your fender? Contact our team with the profile size and we will check it for you.
Product details
| SKU | IP-BFES-60X32 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene B Fender End Stop – 60mm x 32mm – Pre-Punched – Each