
Rubber & FoamSKU IP-TPEB-45X25-STD
TPE B Fender – Black – 45mm x 25mm – 25m Coil
This TPE B fender 45mm x 25mm is a solid black, non-marking bumper strip with a flat 45mm base and two rounded 25mm-high lobes, used to protect pontoon edges, vehicle bodies, loading bays and walls from knocks. It is sold as one continuous 25m coil.
At a glance
- 45mm flat base, 25mm overall height, twin rounded impact lobes
- Centre channel about 10mm deep for screw or rivet heads
- Solid 68 Shore A TPE, flexible and non-marking
- Weather and chemical resistant for indoor or outdoor use
- Rated -50°C to +75°C
- Supplied as a single 25m coil for long continuous runs
Typical uses
- Rubbing strip along pontoon, jetty and boat-dock edges
- Side protection on vans, trucks and ambulances
- Wall and corner guarding in loading bays and warehouses
- Impact strip for shopfitting, counters and trolley routes
- Edge protection on workshop benches and machine frames
Which one do I need?
Pick the profile by how much impact the edge takes and the width you have to fix it to.
| Size | Best for |
|---|---|
| 38mm x 13mm neoprene | Light rubbing strip on small boats and trims |
| 45mm x 25mm TPE (this product) | General-purpose fender with deeper lobes for pontoons, vans and walls |
| 80mm x 40mm TPE | Heavy impact areas such as loading bays and large vessels |
Technical drawing
Specification
| Material | TPE (thermoplastic elastomer) |
| Colour | Black, non-marking |
| Width | 45mm |
| Height | 25mm |
| Hardness | 68° Shore A |
| Density | 1.09 g/cm³ |
| Tensile strength | 7.8 MPa |
| Elongation at break | 700% |
| Temperature range | -50°C to +75°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | One 25m coil |
How much do I need?
Measure each run you want to protect and add about 5% for end trims and joints. Example: three pontoon fingers of 6m each plus a 4m head board make 22m; adding 5% gives 23.1m, so one 25m coil covers the job in continuous lengths.
Fitting tips
- Uncoil and lay the fender straight in a warm area for a few hours so it relaxes before fixing
- Fix through the centre channel with stainless screws or rivets so the heads sit below the lobes
- Space fixings about every 300mm and closer at ends and joints
- Cut ends square with a sharp blade for neat butt joints
Complete your project
- Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil
- TPE B Fender – Solid 80mm x 40mm, Non-Marking – 25m Coil
- Compact TPE D Fender – 50mm x 30mm – 25m Coil
Questions
Can this B fender be used outdoors?
Yes. The TPE compound resists weathering and is suitable for pontoons, vehicles and exterior walls as well as indoor areas.
Will it leave black marks on boats or vehicles?
No. It is a non-marking compound, so it will not transfer black scuffs onto hulls, paintwork or walls.
How is it fixed?
Screw or rivet through the centre channel so the fixings sit below the lobes, or bond it with a suitable adhesive on smooth surfaces.
Can I cut it to length?
Yes, cut it on site with a sharp knife or fine saw; it is supplied as one 25m coil.
Not sure which profile suits your application? Contact our team with your gap size and working conditions and we will help you choose.
Product details
| SKU | IP-TPEB-45X25-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE B Fender – Black – 45mm x 25mm – 25m Coil